Kenwood dual channel meter

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have got an old dual channel mV meter ( up to 1MHz ) made by Kenwood. Model number VT-175.
Would anyone have any schematics for this and/or the alignment procedure for it. There are three pots accessible from the side of the box for each channel.
The calibration seems to be off and I want to set it right.
Thanks.
Ashok.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.