ROWE AMI Jukebox

smj1968 · 18th July 2011, 03:59 PM

Hi. I recently acquired a rowe ami jukebox that plays cds. Model # CD-100E Serial number 1493 It played cds no prob..Volume was great as well. I then decided I needed the lights to work.
there are 4 little white switches (lamp control music and standby switches) which I moved into different positions. I then tried to play a cd again and nothing. If it attempts to pick up
an empty slot u can see the laser bounce up and down and the silver piece the cd sits on spins.
However it does nothing with an actual cd on the laser part. As u can probably tell I do not know alot about these things. Anyone have any ideas/suggestions as to what I might attempt in
order to get the cd player working again? any and all help will be greatly appreciated.

Shawn

Enzo · 18th July 2011, 10:30 PM

Did you try moving the switches back? Especially the standby switch? If there is a switch marked service/operate or something like that, try it. And have you closed the box? I don't recall the innards of that one, but a lot of them have a little flap that pushes a switch back into the operate position when the cover closes. I don't know what you did, but I suspect you put the box in service mode.

JoeDJ · 03:10 AM

Here's a site that has all the manuals for the "CD-100e" in pdf for free DL.... Hope this helps.

Rowe Jukebox Manuals

18th July 2011, 03:59 PM	#1
smj1968 diyAudio Member Join Date: Jul 2011	ROWE AMI Jukebox Hi. I recently acquired a rowe ami jukebox that plays cds. Model # CD-100E Serial number 1493 It played cds no prob..Volume was great as well. I then decided I needed the lights to work. there are 4 little white switches (lamp control music and standby switches) which I moved into different positions. I then tried to play a cd again and nothing. If it attempts to pick up an empty slot u can see the laser bounce up and down and the silver piece the cd sits on spins. However it does nothing with an actual cd on the laser part. As u can probably tell I do not know alot about these things. Anyone have any ideas/suggestions as to what I might attempt in order to get the cd player working again? any and all help will be greatly appreciated. Shawn

19th July 2011, 03:03 AM	#3
JoeDJ diyAudio Member Join Date: Mar 2011 Location: NY State	Here's a site that has all the manuals for the "CD-100e" in pdf for free DL.... Hope this helps. Rowe Jukebox Manuals Last edited by JoeDJ; 19th July 2011 at 03:10 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rowe AMI jukebox amp	richfoub	Tubes / Valves	10	3rd January 2011 02:32 AM
AMI Jukebox speaker impedence question	Bobby Dipole	Tubes / Valves	1	22nd October 2010 06:18 AM
Output transformer from rowe ammi mm4	dehtak	Tubes / Valves	1	26th February 2010 11:53 AM
wooohooo! Three Rowe AMI amps for $200NZD!	aardvarkash10	Tubes / Valves	5	23rd February 2010 07:57 AM
Rowe Ami 125W Amp Board Inputs	coit	Solid State	0	11th February 2010 05:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th July 2011, 10:30 PM	#2
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	Did you try moving the switches back? Especially the standby switch? If there is a switch marked service/operate or something like that, try it. And have you closed the box? I don't recall the innards of that one, but a lot of them have a little flap that pushes a switch back into the operate position when the cover closes. I don't know what you did, but I suspect you put the box in service mode.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)