Microphone Splitter/Isolator Design Help

		Home > Forums > General Interest > Everything Else
Microphone Splitter/Isolator Design Help

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Thread Tools

Search this Thread

9th July 2011, 08:02 AM	#1
svengali diyAudio Member Join Date: Oct 2010	Microphone Splitter/Isolator Design Help I would like to design a microphone splitter using Edcor audio transformerswill be which will be used for recording live shows. I need some help in selecting the correct transformer. I have figured out that I need a 1:1 turns ratio, but I’m not certain about the input/output impedance requirements. I’ve seen some examples using 150/150 and 60/60 transformers. Because of my limited experience with professional audio equipment such as mixing boards, I’m not sure which is the right solution. I would appreciate some help in the right direction. Thanks. sven

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone have a good design for a 3-band isolator or EQ?	cr0wl3y	Analog Line Level	2	6th November 2010 12:55 PM
What splitter for this design ?	Jaap	Tubes / Valves	52	31st December 2008 02:40 PM
Help with splitter design for 7591 PP	avincenty	Tubes / Valves	10	28th April 2008 02:35 PM
microphone splitter box	loonatron	Analogue Source	10	11th March 2004 11:54 PM
Strange phase splitter design !?!?	Glass_painter	Tubes / Valves	6	22nd April 2003 01:19 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

All times are GMT. The time now is 12:26 PM.