diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Everything Else (http://www.diyaudio.com/forums/everything-else/)
-   -   Bubba Oscillator Calculation (http://www.diyaudio.com/forums/everything-else/183549-bubba-oscillator-calculation.html)

jayantskathe 20th February 2011 10:28 AM
Bubba Oscillator Calculation
 
Dear All
I wanted to construct the Bubba Oscillator @ 1kHz. ButI ma not able to get the exact formula. I have lloked the net only all refers to TI pdfs. One of the documents (not of TI) said that the formula is 1/(2*pi*r*c*sqrt(6)) . Is this correct? what precautions to take while making one .

please help

rgds
jayant

Aucosticraft 12th October 2011 12:01 PM
Check using LT spice.

DF96 12th October 2011 12:33 PM
No sqrt(6) in the formula, should be just f=1/(2 pi R C). This is because each CR gives 45 degrees phase shift.


All times are GMT. The time now is 04:55 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 30.00%)
Copyright ©1999-2013 diyAudio