Post Pictures of Your Vero Board Designs Here.

[shaan]

Couldn't find something alike around here... so, thought it would be interesting to have one.

Post photos of all your audio gadgets built on veroboard/dotboard etc.

Happy DIYing.

No P2P/PCB please.

Attached - DoZ+PMA Follower v2 combo.

[shaan]

MY LR4 Xover on vero board, different power feed-line for each IC (Special Feature ).

[shaan]

As it says. My subwoofer amps.

[shaan]

Mono SS SE Class-A. 10W @8ohm. DoZ Preamp on board.

[Plammox]

PCBs are overrated!

Could we see the flip side as well, how you're dealing with grounding/power distribution?

[Mooly]

Not one of mine but the simplest ever project,

Breadboard as Hotplate - ELEKTOR.com | Electronics: Microcontrollers Embedded Audio Digital Analogue Test Measurement

[mymindinside]

Hi Shaan,
what are the yellow axial caps in post #1 (DoZ)?. i have seen similar looking caps at lamington rd in bombay and the vendor claimed that they were polycarbonate caps

cheers,
mymindinside

[Frank Berry]

I built a little Preamp a couple of years ago. Unity gain with Level control, Balance, Bass, Treble.

[wintermute]

Here is one of my better ones some of the uglier ones can be found in the ugly looking amp and ugliest prototype threads

It is an Eric Walin preamp II. I later replaced with a PCB version mad with nicer caps, after I had desoldered and resoldered everything on the board a couple of times trying to find a fault that was not on the board at all, but a stupid mis-configuration of the rca jack's earth tag.

The second shot shows the ugliness that resulted from the excessive desoldering and resoldering whilst trying to find the fault. Just to show that I really can solder the third shot shows the pcb that replaced this proto board

Tony.

[SY]

http://www.diyaudio.com/forums/image...ig11-large.jpg