Dantimax Rel1C Relay Attenuator Clicks

Bengali · 15th April 2010, 05:27 PM

Hi,

does anyone know if it is possible to mod the Rel1C as to remove
the click noise through the speakers?

I can hear the relay clicks coming through the speakers.

Thanks

amc184 · 17th April 2010, 10:55 PM

It sounds like there might be a DC voltage across the attenuator. The the source before the attenuator have a DC offset?

Bengali · 19th April 2010, 10:23 PM

nope.

cap coupled on the pre.

danzup · 20th April 2010, 06:24 AM

Try 1Mohm in parallel with both cap`s on input and on output and tell what is happening .
If the clicks are not out then the problem is in the software of that controller.

15th April 2010, 05:27 PM	#1
Bengali diyAudio Member Join Date: Oct 2006	Dantimax Rel1C Relay Attenuator Clicks Hi, does anyone know if it is possible to mod the Rel1C as to remove the click noise through the speakers? I can hear the relay clicks coming through the speakers. Thanks

20th April 2010, 06:24 AM	#4
danzup diyAudio Member Join Date: Oct 2007 Location: Bucuresti	Try 1Mohm in parallel with both cap`s on input and on output and tell what is happening . If the clicks are not out then the problem is in the software of that controller. __________________ There are not better tube than 6P3S and 6N2P for my ears !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yet another relay attenuator	jwb	Solid State	34	21st July 2010 07:17 AM
dantimax Rel1C resistor table	Bengali	Everything Else	0	22nd March 2010 04:28 PM
P1.7 Dantimax Rel3 Attenuator help	Bengali	Pass Labs	3	10th October 2008 08:27 PM
YET another relay attenuator question	robmil	Solid State	0	14th April 2008 05:44 AM
Ladder relay attenuator or so?	Eccu	Solid State	0	6th October 2003 11:00 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th April 2010, 10:55 PM	#2
amc184 diyAudio Member Join Date: May 2007 Location: Christchurch	It sounds like there might be a DC voltage across the attenuator. The the source before the attenuator have a DC offset?

19th April 2010, 10:23 PM	#3
Bengali diyAudio Member Join Date: Oct 2006	nope. cap coupled on the pre.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)