Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

how hard is it to make a PCB?
how hard is it to make a PCB?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 3rd June 2003, 08:40 AM   #1
theChris is offline theChris
diyAudio Member
Join Date: Dec 2001
Location: SIUE, Illinois, USA
Default how hard is it to make a PCB?

ok, i hate all of this stuff so much right now. every single $2 project costs me $20 or more... like this stupid active crossover. i have really cheap parts which is one saving grace. i'm just trying to test it out.


test 1. failed
fixed a problem.
failed. cost $10

test 2. never tested. say a problem with the capacitors and just scraped it for parts. cost $10

test 3. never finished. used radioshack grid board which was worthless as i can't make tracks or such. cost $5

test 4. halfway done. i really hate how i messed up on the layout. it still should work, but i've already messed up cost so far, less than $5 as parts were salvaged.

and to make things worse, i still don't have a good soldering iron. i just got a new one, with adjustable temperature and a tip so small you can't use it. what setting should the temperature be on? 300C, or higher? at 300C the joints don't get hot enought to melt solder. the components still get hot, as does the board and leads, but the solder just bends out of the way and doesn't melt... BTW, how bad is a cold solder joint. i'm thinking i have a few as i had to touch the solder to the iron and lead at the same time to get any melting because the solder just bends instead of melting. really, it looks terrible, i hate my new iron and now hate soldering again.

in any case, i have to determine if i should just wait a few more months and have the school print me some boards for free. it would likely work and cost less.
if only it could be used for good, not evil...
  Reply With Quote


how hard is it to make a PCB?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why is this so hard? Hirsute Zombie Subwoofers 8 13th February 2008 11:47 PM
How hard can it be? seth556 Chip Amps 32 10th November 2007 01:38 PM
Does this amp look to be hard to fix? mazeroth Solid State 6 30th August 2006 05:12 PM
How make make a microchip, from a program? multiplexor Everything Else 1 20th February 2004 01:24 PM

New To Site? Need Help?

All times are GMT. The time now is 11:17 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio