I found a very versatile DMM since mine went bad

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Here are the specs
Mastech Multimeter Lux Humidity Sound Level dB Meter
DCV: 400m/4/40/400/1000V, +/- 0.7%
ACV: 400m/4/40/400 +/- 0.8% 750V, +/- 1.0%
DCA: 400µ/4m/40m/400m +/- 1.2% 4/10A, +/- 2.0%
ACA: 400µ/4m/40m/400m +/- 1.5 % 4/10A, +/- 3.0%
Resistance: 400/4K/40K/400K/4M +/- 1.2% 40M, +/- 2.0%
Capacitance: 40n/400n/4m/40m/100mF ±3.0%
Frequency: 10/100/1K/10K/100KHz/200KHz ± 2.0%, >200KHz,reference only
Temperature: -20 - 1000 degrees C (0–1,800 degrees F ) +/- 3.0% (C/F selectable)
RH: 20–95%, +/- 5.0%
Lux: 4,000/40,000 Lux, +/- 5.0%
Sount dB: 40 – 100dB, +/- 3.5% @ 94dB
Diode test
Continuity tester: Buzzer if resistance is less than 40 ohms
 
I'm curious how sound level works?

Does it have a built-in microphone? Do you add your own external mic?

I also notice that the sound level frequency response is only 100hz to 8khz. That might be good for general sound levels, but not for detailed testing.

Is that limited by the internal mic and can it be improved by adding an extremal mic?

Still, it's a sweet meter for a very modest price.

Steve/bluewizard
 
it has a microphone built into the bottom

There is a microphone, Light meter, temptature/ humidity I will bet some one around here will figure a way to tweek it to take a microphone sooner or later. That also bring up an interesting subject who can tell us how to make a califrated spl measuring microphone up 40khz that will work with it
 
Circuit Specialists has a very similar meter for around $43. On top of that they throw in a (even cheaper) meter for free if your order is over $50 and you ask for it.

5 in 1 meter

While very cheap, not super accurate, and not auto ranging, the free meter is somewhat useful as it measures hFE and temp, and has 4V AC range with 1 mV resolution.
 

Attachments

  • _44431213_scrum_ap203b.jpg
    _44431213_scrum_ap203b.jpg
    21 KB · Views: 110
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.