|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools...... |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Feb 2002
Location: Western Sydney
|
Can someone enlighten me as to the meaning of the word 'dimed', as in 'A guitar with its volume dimed will have an output impedance lower than 34k'?
TIA, Pete McK
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency |
|
|
|
#2 |
|
diyAudio Member
Join Date: Feb 2002
Location: Western Sydney
|
found this:
http://en.wiktionary.org/wiki/dimed "Using dimed to mean at ten or full volume is pretty common here in South Carolina” "The only way you're going to get the 'dimed marshal plexi' sound is with a dimed marshall plexi. It's gotta be non-master, though, and you have to put all the knobs on 10." so what do you call it if your amp goes up to 11?...
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency |
|
|
|
#3 | |
|
diyAudio Member
Join Date: Feb 2004
Location: Anonymityville
|
Quote:
__________________
"If you don't like funerals don't kick sand in Ninja's face." - Ninja |
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |