Hello all, this is my first thread! I wasn't entirely sure where to post it, so I threw it here.
I'm building a stand alone Frankenstein spring reverb circuit, part tube, part transistor and part op amp- I'm not quite happy with the tone of the reverb and want to add a simple EQ circuit where I can actively add some more treble. Ideally, I'd like it to have 2 controls; a cut/boost dial and a frequency sweep dial. Unfortunately, I don't yet know enough to design one myself, and an hour searching the web has turned up very little.
Was wondering if anyone here had some suggestions or could direct me to a schematic that might work.
many thanks,
S
I'm building a stand alone Frankenstein spring reverb circuit, part tube, part transistor and part op amp- I'm not quite happy with the tone of the reverb and want to add a simple EQ circuit where I can actively add some more treble. Ideally, I'd like it to have 2 controls; a cut/boost dial and a frequency sweep dial. Unfortunately, I don't yet know enough to design one myself, and an hour searching the web has turned up very little.
Was wondering if anyone here had some suggestions or could direct me to a schematic that might work.
many thanks,
S
...or are you after a Parametric EQ which has a tunable boost/cut with adjustable Q?
like this?
http://www.geofex.com/Article_Folders/EQs/paramet.htm
like this?
http://www.geofex.com/Article_Folders/EQs/paramet.htm
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.