Managing vibrations on audio equipments

Eric Juaneda · 5th November 2008, 04:22 PM

Hi everybody,

Managing vibration in audio equipment is certainly the last thing people think about. Managing vibration greatly improve an audio rendering. Mechanical vibrations are as important as electronic. I wrote an article and provide a very simple recipe to put your system on top.

Managing vibrations, a straight way to enhance audio performances

If you have experience or other point of view thanks to share it.

Eric

fraserh · 7th November 2008, 06:36 PM

Quite a handy resource. I found the article on grounding helpful too, i need to swot up on that for an upcoming project. Thanks

Eric Juaneda · 8th November 2008, 07:41 AM

Thanks fraserh

Eric

5th November 2008, 04:22 PM	#1
Eric Juaneda diyAudio Member Join Date: Dec 2006 Location: Avignon, France	Managing vibrations on audio equipments Hi everybody, Managing vibration in audio equipment is certainly the last thing people think about. Managing vibration greatly improve an audio rendering. Mechanical vibrations are as important as electronic. I wrote an article and provide a very simple recipe to put your system on top. Managing vibrations, a straight way to enhance audio performances If you have experience or other point of view thanks to share it. Eric

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
equipments needed	Stefanoo	Equipment & Tools	9	17th August 2006 12:30 PM
where are audio equipments in Beijing?	cominup	Tubes / Valves	10	17th December 2004 01:35 AM
Affordable Testing Equipments?	rakeshln	Multi-Way	3	16th June 2004 02:19 PM
F/S: Lots of home HIFI parts and equipments........	DSummer	Swap Meet	7	7th July 2003 02:26 AM
Testing cabinet vibrations	Kanga	Multi-Way	23	14th April 2003 09:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th November 2008, 06:36 PM	#2
fraserh diyAudio Member Join Date: Oct 2008	Quite a handy resource. I found the article on grounding helpful too, i need to swot up on that for an upcoming project. Thanks

8th November 2008, 07:41 AM	#3
Eric Juaneda diyAudio Member Join Date: Dec 2006 Location: Avignon, France	Thanks fraserh Eric

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)