Enclosure for breadboard suggestions

espressogeek · 19th September 2008, 08:53 PM

I finished my first DIY amp the other day. It is a little CmoyBB built on a JDS board. After a few weeks of trolling these forums and reading various sites I decided I would like to tinker around with building various audio circuits. I picked this breadboard, http://mouser.com/Search/ProductDeta...89-TW-E41-1060 , and I would like to choose a good case for it. I travel a lot so soldering needs to be done only when necessary as I don't want to set off any smoke detectors in the rooms. What do you all think would be a good case to mount various inputs and what not too and use as a traveling project box?

Nordic · 21st September 2008, 03:12 PM

I not advise you to use this as anything but a prototypeing device... order some veroboard or stripboardand do your circuit on that... Maybe start by looking for a small hammond case, this is used for most DIY cmoys, appart from tins of course.

19th September 2008, 08:53 PM	#1
espressogeek diyAudio Member Join Date: Aug 2008	Enclosure for breadboard suggestions I finished my first DIY amp the other day. It is a little CmoyBB built on a JDS board. After a few weeks of trolling these forums and reading various sites I decided I would like to tinker around with building various audio circuits. I picked this breadboard, http://mouser.com/Search/ProductDeta...89-TW-E41-1060 , and I would like to choose a good case for it. I travel a lot so soldering needs to be done only when necessary as I don't want to set off any smoke detectors in the rooms. What do you all think would be a good case to mount various inputs and what not too and use as a traveling project box?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hemp FR8C Enclosure Suggestions	Hardman	Full Range	102	16th December 2010 08:20 PM
need FR suggestions for an old enclosure.	brookbh	Full Range	4	28th April 2009 05:25 AM
enclosure suggestions	deki	Multi-Way	3	12th November 2006 09:06 AM
Prototyping ( Breadboard ) Chassis Ideas and Suggestions	DrDeville	Tubes / Valves	4	31st March 2004 07:46 AM
Are you looking for suggestions for enclosure shapes?	kneadle	Multi-Way	4	2nd March 2003 02:42 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st September 2008, 03:12 PM	#2
Nordic diyAudio Member Join Date: Sep 2005	I not advise you to use this as anything but a prototypeing device... order some veroboard or stripboardand do your circuit on that... Maybe start by looking for a small hammond case, this is used for most DIY cmoys, appart from tins of course.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)