Custom made 19" enclosure in London or around

EricAppla · 25th August 2008, 03:48 AM

Hi,

I am looking for someone either able to build custom made table/19" rack enclosure somewhere around London preferably South London or someone who have suitable tools to allow me to make one.

I'm probably just not good in looking on iternet but I can't find a suitable company to make table with 20U 19" rack enclosure instead of drawers in close proximity at all

Thanks for any suggestions

Chartal · 25th August 2008, 06:21 AM

Do you need something like that.

Winsted - Media Workstations Rackmount Desks

EricAppla · 25th August 2008, 02:21 PM

Thanks for your tip.

It's very close to what I need, I'll try to talk to them to what level they can customize and how huch it's worth.

I need rigid cabinet with either low noise active cooling or sophisticated fanless design to ba able to fit in 4 pieces of 4U 2x 200W/4Ohm amplifiers and active crossover. Approx 45W each amp without load.

Will see if they can fulfill my needs

25th August 2008, 03:48 AM	#1
EricAppla diyAudio Member Join Date: May 2008	Custom made 19" enclosure in London or around Hi, I am looking for someone either able to build custom made table/19" rack enclosure somewhere around London preferably South London or someone who have suitable tools to allow me to make one. I'm probably just not good in looking on iternet but I can't find a suitable company to make table with 20U 19" rack enclosure instead of drawers in close proximity at all Thanks for any suggestions

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: very nice RAAL "FlatFoil" ribbon tweeters {NIB }, with custom made front plate	yairf	Swap Meet	3	2nd June 2009 09:25 AM
Custom made passive x-overs	RacerXtreme	Multi-Way	4	21st December 2008 05:54 PM
Need a some custom aluminum enclosures made	triden	Everything Else	5	27th November 2007 01:29 PM
Custom made Front panels (rear as well:-)	AR2	Parts	1	5th January 2004 08:06 PM
custom made soft bridges	nobody special	Everything Else	15	14th May 2003 04:07 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th August 2008, 06:21 AM	#2
Chartal diyAudio Member Join Date: Nov 2004 Location: Montreal	Do you need something like that. Winsted - Media Workstations Rackmount Desks

25th August 2008, 02:21 PM	#3
EricAppla diyAudio Member Join Date: May 2008	Thanks for your tip. It's very close to what I need, I'll try to talk to them to what level they can customize and how huch it's worth. I need rigid cabinet with either low noise active cooling or sophisticated fanless design to ba able to fit in 4 pieces of 4U 2x 200W/4Ohm amplifiers and active crossover. Approx 45W each amp without load. Will see if they can fulfill my needs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)