Need Aleph stuffing guide

woody · 19th March 2008, 01:03 PM

I picked up a couple of Aleph boards a couple of years back
but can't rember what Aleph version they are and need a stuffing guide. They do say layout by BrianGT but Brian doesn't recognize
them. Do these look familiar?

jacco vermeulen · 19th March 2008, 01:09 PM

ZenV9 and PS boards, by Peter-Daniel and Mr Damian Unisonus Antoniak.

schematics

woody · 19th March 2008, 01:14 PM

Sorry I got a couple of photos mixed up. Yes I know thats a
zv9 board. Thanks for the quick reply.

woody · 19th March 2008, 01:39 PM

Here is the board I need help with.

jacco vermeulen · 19th March 2008, 01:58 PM

beep

cbcassell · 19th March 2008, 06:28 PM

See if this one corresponds to the PCB.

Chris

19th March 2008, 01:09 PM	#2
jacco vermeulen diyAudio Member Join Date: Oct 2004 Location: At the sea front, Rotterdam or Curaçao	ZenV9 and PS boards, by Peter-Daniel and Mr Damian Unisonus Antoniak. schematics __________________ Not so much,.......if it says "ZM" in the corner.

19th March 2008, 01:58 PM	#5
jacco vermeulen diyAudio Member Join Date: Oct 2004 Location: At the sea front, Rotterdam or Curaçao	beep __________________ Not so much,.......if it says "ZM" in the corner.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New guide from TI	FastEddy	Parts	0	19th August 2007 08:36 PM
working on a UCD guide	cowanrg	Class D	5	2nd January 2006 05:39 AM
First go at it without a guide or kit..............HELP!!!!!	Gavinator68	Multi-Way	1	9th November 2005 07:33 AM
what is a wave guide?	Joules	Multi-Way	7	12th May 2005 02:25 PM
Mark Finnis' Aleph 5 schematic & Stuffing PDF	Guiness	Pass Labs	1	14th March 2004 02:56 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th March 2008, 01:14 PM	#3
woody diyAudio Member Join Date: Jan 2002 Location: Tyrone Ga. U.S.A.	Sorry I got a couple of photos mixed up. Yes I know thats a zv9 board. Thanks for the quick reply.