Control amp power on/off by receiver?
I'm tired of having to get into my audio cabinet to manually switch on and off my amplifiers. I know there is debate between leave em on or shut em off but I do not use them daily so I choose to shut em off. Anyone have a tricky product or idea that will make the amps power on when I power on the receiver?
I got one of those power supply/cleaner things off ebay for a friend of mine. It has a bunch of switched/delayed outlets on the back. It was a BELKIN AP21100-12. Anyway, it has a remote on it that you plug this trigger 110 plug into and that turns the rest on, or there is a DC wire I guess. Or you can turn it on via button, but the hot outlets stay on all the time. Now my friend has like 4 amps on it of 600-800w or something running sub amps and two 5.1s, he says he can turn it up louder now with no clipping. I think he said it was over 15 amps on the readout.
If your receiver has a switched AC outlet on the back you can use a device like described above, or you can build one yourself with a few AC relays.
If your receiver doesn't have a switched outlet, then you can use a wireless AC switch like I do. I have three AudioSource AMP7-T and I use a switch similar to the ones below.
|All times are GMT. The time now is 04:23 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio