diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Everything Else (http://www.diyaudio.com/forums/everything-else/)
-   -   DD/ DTS signal not being detected (http://www.diyaudio.com/forums/everything-else/111677-dd-dts-signal-not-being-detected.html)

Vivek 10th November 2007 04:06 PM

DD/ DTS signal not being detected
 
Hi all,
I use a Denon AVR1403 5.1 receiver and a Samsung DVD player. Both are about three years old. When I use the coaxial connection, the Dolby Digital and DTS signals are not being recognised. The other DSP modes like Pro Logic and virtual surround etc are working fine. I changed the coaxial cable and tried several DVDs. The same problem exists. One thing I noticed is that the DVD player's RCA sockets appear to be weak and the picture flickers and sound distorts when I handle the RCA plugs. Has my DVD player past its life? Thanks for any inputs.

Vivek

gmphadte 13th November 2007 06:29 AM

The solder of the RCAs tends to break by shaking (intentional/unintentional).
Just open up and check.

Also check the cable. Sometimes the connector parts are riveted and could be a problem.

Gajanan Phadte

Vivek 13th November 2007 07:04 PM

The outputs were set to PCM and not bitstream. It's working fine now. Thanks for your reply.

Vivek

kannan921 18th November 2007 06:57 PM

Quote:

Originally posted by Vivek
The outputs were set to PCM and not bitstream. It's working fine now. Thanks for your reply.

Vivek

hi vivek, sorry 2 interrupt here. i tried 2 mail u but i couldn't. i just want 2 build a 7.1 system. my primary use will b games. and then movies n music. my budget is 7-8k rs. i can increase the budget if i get far better quality. plz suggest me drivers. plz mail me kannan921@hotmail.com
expecting ur reply. tx.


All times are GMT. The time now is 10:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2