eagle routing

djronbxs · 21st September 2007, 07:44 AM

Hi,

does eagle have the option to narrow the track with to pass between pins pads and then widens it again after it passes the pad ?

Nordic · 21st September 2007, 06:45 PM

Yes, just draw the trace to right before you want it to go thin, then change the width in the toolbar at the top, extend the thin piece through where it should go, click on width again and select the original trace width to continue on...

You can also change width of existing segments by clicking on the spanner icon... > width> select the trace thickness and just click on the segments...

21st September 2007, 07:44 AM	#1
djronbxs diyAudio Member Join Date: May 2006	eagle routing Hi, does eagle have the option to narrow the track with to pass between pins pads and then widens it again after it passes the pad ?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PCB Routing	Mark245	Parts	15	27th May 2009 07:54 PM
Routing question...	cyberspyder	Multi-Way	6	21st February 2008 11:44 PM
Routing aluminium?	EC8010	Everything Else	43	27th November 2007 12:31 AM
cadsoft eagle 2 layer routing	djronbxs	Solid State	4	10th January 2007 01:55 PM
MDF cnc routing	dhole	Multi-Way	1	21st January 2006 04:38 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st September 2007, 06:45 PM	#2
Nordic diyAudio Member Join Date: Sep 2005	Yes, just draw the trace to right before you want it to go thin, then change the width in the toolbar at the top, extend the thin piece through where it should go, click on width again and select the original trace width to continue on... You can also change width of existing segments by clicking on the spanner icon... > width> select the trace thickness and just click on the segments...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)