What part of DIY do you HATE? - Page 4 - diyAudio
Go Back   Home > Forums > General Interest > Everything Else

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th May 2007, 12:20 AM   #31
jarthel is offline jarthel  Australia
diyAudio Member
 
Join Date: Jan 2002
Location: somewhere in Australia
chassis work!

most difficult part of the project.
  Reply With Quote
Old 14th May 2007, 12:38 AM   #32
nhuwar is offline nhuwar  United States
diyAudio Member
 
nhuwar's Avatar
 
Join Date: Jan 2007
Location: Cypress Texas
Chassis works all about the tools.

For matal chassis a plasma cutter would be a God send unfortunately small one cost over a grand.
I hate that.

Nick
  Reply With Quote
Old 14th May 2007, 01:03 AM   #33
Vuokko is offline Vuokko  Finland
diyAudio Member
 
Join Date: Feb 2007
Location: Northern Finland
Send a message via ICQ to Vuokko Send a message via MSN to Vuokko
I used to hate chassiswork.

Nowdays all my DIYing goes to aluminium briefcase. Really boxy looking and thick aluminium. Not the businessmodels

Some reasons:
It's openable
It's metal
It looks different but is cheap
It has handle
Usually they are standard sizes. Atleast ones with sane make are.
and finally when I'm not using device, I twist of outer parts put them insade briefcase and it's stackable. That ometimes needs some extra work. Heatsink, tranistors and two D-connetors are my usual way getting that done. Tubes would be much easier Next project will be making one in those case.

My closet looks funny. Two computers, labPSU, two SS amplifiers and some hobbystuff. No toolbox there and I have 9 cases piled up Tools are in three other boxes.

That problem is solved for me. So who want's to clean up for me without messing my dynamic archiving system?
  Reply With Quote
Old 14th May 2007, 01:09 AM   #34
nhuwar is offline nhuwar  United States
diyAudio Member
 
nhuwar's Avatar
 
Join Date: Jan 2007
Location: Cypress Texas
The chassis I'm going to build fot my next amp I think will be mostly wood, copper, and for some exotic flare the metal plate for the attenuator will be tantalum.

Nick
  Reply With Quote
Old 14th May 2007, 01:16 AM   #35
diyAudio Member
 
Join Date: Mar 2004
Location: Kansas City
Default Being on the fringe with no one to talk to

As I push the boundaries way outside the norm, ie tubes and low power amps and full range drivers in unconventional enclosures, there is no one locally to talk to about it. Sure glad DIYAudio exists. Thanks, doc, I feel better now.
  Reply With Quote
Old 14th May 2007, 02:08 AM   #36
diyAudio Member
 
Runco990's Avatar
 
Join Date: Jan 2007
Location: Los Angeles
Watching the prices for even garbage tube parts soar into the stratosphere on ebay!!

Sure makes DIY hard if you are on a budget. Everything else I can deal with.
  Reply With Quote
Old 14th May 2007, 02:27 AM   #37
wa2ise is offline wa2ise  United States
diyAudio Member
 
wa2ise's Avatar
 
Join Date: Apr 2005
Location: NJ
Finding that I need to drill additional holes in a chassis that already has lots of electronics wired up. having to make sure the metal bits don't get lodged into hard to access spots that might short something out, and the vibration from the drilling that might break something in the existing electronics.

And why do drill bit makers insist on making larger sized bits longer? I've had it happen that the chassis I was working on fit into the drill press okay with the smaller bits, but not the larger bit I needed to finish the hole.
  Reply With Quote
Old 14th May 2007, 02:29 AM   #38
diyAudio Member
 
tubelab.com's Avatar
 
Join Date: Jul 2005
Location: West Virginia panhandle
Like:

1) The sweet smell of success
2) Making up my mind on which idea to turn into a project, and starting it
3) Plugging in a fresh build and hearing sweet sound
4) Figuring out a new design on the breadboard in a single day
5) the electronics of amp building
6) getting all of the parts to build that cool amp

Dislike:

1)The pungent smell of a toasted transformer
2) Changing my mind halfway through and never finishing
3) Plugging in a fresh build, and hearing the sizzle of toasted parts
4) Taking 6 months to turn a breadboard design into a real amp
5) The mechanics of amp building
6) getting the VISA bill for those parts

A few observations:

NIC1138: there is another variable in that equation, money! It is however a dependent variable, inversely proportional to T_free (job) and also inversely proportional to T_woman.

Women do not understand why we need more amplifiers, or more horsepower. We do not understand the need for seven pillows on the bed, that you can not use, 10 pairs of shoes, or 6 different purses. It is best agreed that these things are not meant to be understood.

Sherri and I have been taking woodworking classes at the local community school (for amplifier chassis of course). She still won't understand the need for that new miter saw in the garage either.

marsupialx: I know the feeling. I work in a facility that houses at least 1000 engineers. There are 3 of us who play with tubes. there are 997 who ask, WHY?
__________________
Too much power is almost enough! Turn it up till it explodes - then back up just a little.
  Reply With Quote
Old 14th May 2007, 03:10 AM   #39
diyAudio Member
 
Join Date: Mar 2007
Location: Kansas
Default Extreme Dislikes...

1) All chassis work,
2) Figuring out how to route wires in a confined space for minimal noise, then discovering that I made a mistake somewhere along the way,
3) Waiting 3 weeks for parts to arrive, and
4) Trying to find time for DIY
__________________
My band Waffle Stomp: http://www.facebook.com/wafflestompband
  Reply With Quote
Old 14th May 2007, 03:34 AM   #40
diyAudio Moderator Emeritus
 
ray_moth's Avatar
 
Join Date: Jan 2004
Location: Jakarta
Being clumsy, I hate:

* Chassis work.

* Soldering to things that don't want to accept the solder, e.g. a lot of tube sockets I've tried; many resistors; Veroboard, to the extend that I swear I will never use it again.

* Soldering in very cramped/confined spaces.

* Burning cable insulation accidentally with the soldering iron (I did this once to the lead of the soldering iron itself and only realized it afer several annoying shocks).

* 3-legged fuses, a.k.a. transistors - only go to look at 'em and they blow up.

* Finding out a cap is no good, after wasting hours trying to trace the fault.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
I hate violin. tade Music 43 14th June 2007 04:26 PM
Don't you just hate it when Trout Tubes / Valves 49 31st May 2006 05:06 PM
I hate you. Sch3mat1c Forum Problems 10 3rd February 2003 11:58 PM
I hate Veneer!!!! Milzie Multi-Way 38 21st December 2002 06:27 PM


New To Site? Need Help?

All times are GMT. The time now is 08:12 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2