Benchtop Power Supply from Elektor Electronics magazine

AudioFreak · 28th April 2002, 08:27 AM

Does anyone have a copy of this project? it started in the November 2001 edition of Elektor and continued for many issues after that.... if you have a copy i'll email you and tell you my private email address.

AudioFreak · 30th April 2002, 10:54 AM

I've aquired all but the December installment of this article ... if anyone here has the December 2001 edition of Elektor Magazine and has access to a scanner, please let me know so i can arrange with you to send a copy of the article to me. Thanks.

dc · 1st May 2002, 06:03 PM

Based on your posts, I wrote to Elektor. They told me that I can order photocopies of the articles from the November and December issues for 3 GBP each. The reply also stated that the article only lasted those two months. Is this incorrect?

Could you post a few details about the project (output, total estimated cost, etc.)?

Thanks.

brad

AudioFreak · 2nd May 2002, 04:04 AM

yes i later found that it is only the 2 months; sorry about the mistake in the 1st post .... i'm not sure regarding cost etc as i am planning to use this project as a guide to designing my own along similar but more complex lines ....

The Elektor unit ouputs 0-25V @ 0.1-2.5A constant voltage or constant current and you can purchase the pcb's, PIC and software from Elektor.

28th April 2002, 08:27 AM	#1
AudioFreak Warp Engineer On Holiday Join Date: Oct 2001 Location: Queensland, Australia	Benchtop Power Supply from Elektor Electronics magazine Does anyone have a copy of this project? it started in the November 2001 edition of Elektor and continued for many issues after that.... if you have a copy i'll email you and tell you my private email address.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Elektor Lab Power Supply Oct/Nov 1990	smithy666	Elektor	15	13th October 2010 06:35 AM
Guidance for a benchtop power supply for car amp	chemhaz	Car Audio	3	14th June 2008 01:53 AM
HV benchtop power supply, help on opamp setup	panos29	Tubes / Valves	17	20th April 2008 11:27 AM
Wiring car amp to a benchtop power supply	bans27	Everything Else	5	15th March 2006 09:30 AM
Crescendo Millenium amplifier (ELEKTOR magazine ¹4 2001 p.36-45)?	alex0	Solid State	22	13th March 2002 10:46 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th April 2002, 10:54 AM	#2
AudioFreak Warp Engineer On Holiday Join Date: Oct 2001 Location: Queensland, Australia	I've aquired all but the December installment of this article ... if anyone here has the December 2001 edition of Elektor Magazine and has access to a scanner, please let me know so i can arrange with you to send a copy of the article to me. Thanks.

1st May 2002, 06:03 PM	#3
dc diyAudio Member Join Date: Dec 2001 Location: NYC	Based on your posts, I wrote to Elektor. They told me that I can order photocopies of the articles from the November and December issues for 3 GBP each. The reply also stated that the article only lasted those two months. Is this incorrect? Could you post a few details about the project (output, total estimated cost, etc.)? Thanks. brad

2nd May 2002, 04:04 AM	#4
AudioFreak Warp Engineer On Holiday Join Date: Oct 2001 Location: Queensland, Australia	yes i later found that it is only the 2 months; sorry about the mistake in the 1st post .... i'm not sure regarding cost etc as i am planning to use this project as a guide to designing my own along similar but more complex lines .... The Elektor unit ouputs 0-25V @ 0.1-2.5A constant voltage or constant current and you can purchase the pcb's, PIC and software from Elektor.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)