diyAudio (
-   Equipment & Tools (
-   -   Benchtop Power Supply from Elektor Electronics magazine (

AudioFreak 28th April 2002 07:27 AM

Benchtop Power Supply from Elektor Electronics magazine
Does anyone have a copy of this project? it started in the November 2001 edition of Elektor and continued for many issues after that.... if you have a copy i'll email you and tell you my private email address.

AudioFreak 30th April 2002 09:54 AM

I've aquired all but the December installment of this article ... if anyone here has the December 2001 edition of Elektor Magazine and has access to a scanner, please let me know so i can arrange with you to send a copy of the article to me. Thanks.

dc 1st May 2002 05:03 PM

Based on your posts, I wrote to Elektor. They told me that I can order photocopies of the articles from the November and December issues for 3 GBP each. The reply also stated that the article only lasted those two months. Is this incorrect?

Could you post a few details about the project (output, total estimated cost, etc.)?



AudioFreak 2nd May 2002 03:04 AM

yes i later found that it is only the 2 months; sorry about the mistake in the 1st post .... i'm not sure regarding cost etc as i am planning to use this project as a guide to designing my own along similar but more complex lines ....

The Elektor unit ouputs 0-25V @ 0.1-2.5A constant voltage or constant current and you can purchase the pcb's, PIC and software from Elektor.

All times are GMT. The time now is 02:34 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2