My hi-fi system (incl custom-designed bits) - diyAudio
Go Back   Home > Forums > Design & Build > Equipment & Tools

Equipment & Tools From test equipment to hand tools

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th July 2013, 05:08 AM   #1
DanielF is offline DanielF  Australia
diyAudio Member
 
Join Date: Nov 2008
Default My hi-fi system (incl custom-designed bits)

Ten years in the planning and three years in the building, my Gerroa hi-fi system is now complete, physically at least (as my wife says, the software/firmware improvements will probably go on for the rest of my life)! In fact it has been complete since last year, but has taken me this long to assemble and edit hundreds of video clips to make a coherent presentation!

So, for your entertainment/interest/boredom, here is a video trilogy I made about the construction and operation of the system.

Daniel's Hi-Fi system, Part 1 of 3 - building the cabinet (5m28s) - YouTube

Daniel's Hi-Fi system, Part 2 of 3 - the working system; special features (11m42s) - YouTube

Daniel's Hi-Fi system, Part 3 of 3 - the all-important Switch-Box (5m50s) - YouTube

Apologies for the low video/audio quality, as elaborated in my Description on YouTube. Don't forget you can view YouTube videos full-frame by clicking the icon in the bottom-right corner of the video frame.

Regards,
Daniel
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Where to have a custom project kit designed? ashleycox Parts 29 7th March 2012 01:02 PM
Custom designed aluminum chassis shell panel processing wiredrawing sanded anodic oxi lotus03 Vendor's Bazaar 16 25th May 2011 02:17 AM
Custom designed transformer for Andrea Ciuffoli 6c33c OTL AMP.... zxcxz Tubes / Valves 2 10th July 2009 04:14 PM
Hi-Fi system build DMoe Tubes / Valves 13 28th December 2007 07:41 PM
FS, my old system and bits and pieces Toast_Master Swap Meet 2 16th July 2006 12:36 PM


New To Site? Need Help?

All times are GMT. The time now is 11:28 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2