|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Equipment & Tools From test equipment to hand tools |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
24th September 2011, 03:27 AM
|
#21 |
|
Audio Junkie
diyAudio Member
Join Date: Sep 2004
Location: MN
|
I love Mach3 it has a LOT of nice features!
Mach even has a built in PWM spindle motor driver control section built in. It will output a PWM signal on one of the printer port pins. I took that signal and use an opto isolator to drive a mosfet driver IC and mosfet to control my modified dremel tool! Mach even has the P.I.D. integrator functions built in for speed feedback control! the software does everything! Zc
__________________
It's not about what you can BUY...It's about what you can BUILD! |
|
|
11th February 2012, 08:03 AM
|
#23 |
|
diyAudio Moderator
Join Date: Mar 2003
Location: searching...
|
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CAD modelling of waveguides for CNC milling? | fb | Multi-Way | 89 | 1st September 2011 12:30 PM |
| FS: 2-Axis PCB milling table | Bakmeel | Swap Meet | 2 | 28th April 2009 08:15 PM |
| Contracting CNC for waveguide milling | jason_watkins | Multi-Way | 0 | 15th August 2008 09:52 PM |
| PCB drilling alternatives | nemestra | Parts | 11 | 10th April 2008 11:29 PM |
| Drilling a PCB | KP11520 | Everything Else | 34 | 12th September 2007 12:28 AM |
| New To Site? | Need Help? |
