Leader LSG231

toprepairman · 15th April 2011, 12:06 PM

Hi.
I'm looking for a schematic/service information on this stereo generator.
Can anyone help please?
Many thanks
Henry

cliffyk · 23rd April 2011, 04:13 PM

Get in touch with Leader through their website, they are very good about providing documentation for the older instruments...

toprepairman · 26th April 2011, 12:29 PM

Hi Cliff. Many thanks for the treply, I'll give them a go.
Regards
Henry

audiohead · 29th April 2011, 02:19 PM

Hi Henry:

I have the schematic, send me an email.

Art

audiohead · 2nd May 2011, 01:12 AM

Hi Henry:

I just emailed you the schematic.

Art

toprepairman · 2nd May 2011, 09:14 AM

Hi Art.
That's fantastic, really great.
Much appreciated.
I have one of these and it works fine except the pilot phase control seems wrong. When adjusted for optimal the left and right are transposed.
To get left and right correct then the trimmer is right at one end of travel and really not quite there, so now I have a chance to get it correct.
Many thanks for your help again.
Regards
Henry

PS I do have many other circuit diagrams so if you're looking for something specific I may be able to help, always worth a try.

audiohead · 2nd May 2011, 02:01 PM

I had the same exact problem with mine!

Art

ronaldw441 · 3rd May 2011, 05:21 AM

toprepairman,

I'm 99.9% sure that I have one of these & the manual is in the box. The only problem is that I can't find it........

I'll keep looking.....

Ron

toprepairman · 3rd May 2011, 07:24 AM

Hi Ron, thanks for the search, I seem to have the same problem, can't find things, and strangely having a tidyup only makes it worse!
Hi Art, that's amazing you had the same problem, did you find a cure?
Regards
Henry

audiohead · 3rd May 2011, 04:38 PM

Hi Henry:

Sorry I do not remember what I exactly did this was done 21 years ago.

Now I use Leader 3216.

Art

15th April 2011, 12:06 PM	#1
toprepairman diyAudio Member Join Date: Nov 2010	Leader LSG231 Hi. I'm looking for a schematic/service information on this stereo generator. Can anyone help please? Many thanks Henry

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Leader LAG-126S	milandks	Parts	4	1st February 2012 03:23 PM
Leader LBO-552BH Stereoscope	sneakers563	Equipment & Tools	3	22nd September 2010 08:39 PM
Stereoscope Leader	Rafael L	Analog Line Level	0	29th May 2009 12:15 PM
Micromega Leader	Fin	Digital Source	0	15th July 2004 02:49 AM
Leader splicing tape - used on both sides?	bcherry	Analogue Source	4	5th September 2003 11:24 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

23rd April 2011, 04:13 PM	#2
cliffyk diyAudio Member Join Date: Nov 2009	Get in touch with Leader through their website, they are very good about providing documentation for the older instruments...

26th April 2011, 12:29 PM	#3
toprepairman diyAudio Member Join Date: Nov 2010	Hi Cliff. Many thanks for the treply, I'll give them a go. Regards Henry

29th April 2011, 02:19 PM	#4
audiohead diyAudio Member Join Date: Mar 2005 Location: Los Angeles, california	Hi Henry: I have the schematic, send me an email. Art

2nd May 2011, 01:12 AM	#5
audiohead diyAudio Member Join Date: Mar 2005 Location: Los Angeles, california	Hi Henry: I just emailed you the schematic. Art

2nd May 2011, 09:14 AM	#6
toprepairman diyAudio Member Join Date: Nov 2010	Hi Art. That's fantastic, really great. Much appreciated. I have one of these and it works fine except the pilot phase control seems wrong. When adjusted for optimal the left and right are transposed. To get left and right correct then the trimmer is right at one end of travel and really not quite there, so now I have a chance to get it correct. Many thanks for your help again. Regards Henry PS I do have many other circuit diagrams so if you're looking for something specific I may be able to help, always worth a try.

2nd May 2011, 02:01 PM	#7
audiohead diyAudio Member Join Date: Mar 2005 Location: Los Angeles, california	I had the same exact problem with mine! Art

3rd May 2011, 05:21 AM	#8
ronaldw441 diyAudio Member Join Date: Aug 2008	toprepairman, I'm 99.9% sure that I have one of these & the manual is in the box. The only problem is that I can't find it........ I'll keep looking..... Ron

3rd May 2011, 07:24 AM	#9
toprepairman diyAudio Member Join Date: Nov 2010	Hi Ron, thanks for the search, I seem to have the same problem, can't find things, and strangely having a tidyup only makes it worse! Hi Art, that's amazing you had the same problem, did you find a cure? Regards Henry

3rd May 2011, 04:38 PM	#10
audiohead diyAudio Member Join Date: Mar 2005 Location: Los Angeles, california	Hi Henry: Sorry I do not remember what I exactly did this was done 21 years ago. Now I use Leader 3216. Art

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)