diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Equipment & Tools (http://www.diyaudio.com/forums/equipment-tools/)
-   -   Troubleshoot M92A Multimeter (http://www.diyaudio.com/forums/equipment-tools/185315-troubleshoot-m92a-multimeter.html)

g4ran 18th March 2011 07:37 AM

Troubleshoot M92A Multimeter
 
:confused:Hi all i'm a new to the site and i was wondering if anyone can give me some advice, i have M92A multimeter and as soon as i turn it to continuity test it starts buzzing without being connected to anything the rest of the meter appears to be ok, i have looked at the pcb and all the resistors components look are surface mounted buy 2 look like they have had the solder re-run by hand (R20 + R21) i was wondering if anyone knows if these control the continuity test part of the meter thanks.

audiomik 19th March 2011 05:46 AM

Think if it is the same 'M92A' as in this link:
M92A Multimeter - China meter, measurement in Meter for Electricity

you may have to contact the Manufacturer in China for the info you are looking for :rolleyes:
Mik

pinkmouse 19th March 2011 09:44 AM

It's not just a low battery warning is it? ;)

g4ran 19th March 2011 01:07 PM

Troubleshoot M92A Multimeter
 
Hi pinkmouse i have tried changing the battery but it made it made no difference

audiomik the meter is the same as the one in your link so i'll give them a try,

Thank you both very much for your help.


All times are GMT. The time now is 07:54 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2