diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Equipment & Tools (http://www.diyaudio.com/forums/equipment-and-tools/)
-   -   Testing Drivers (http://www.diyaudio.com/forums/equipment-and-tools/183068-testing-drivers.html)

DC Sounds 13th February 2011 12:17 PM

Testing Drivers
 
I need to test a few tweeters that i have just recieved yesterday. (I own all the testing equipment.)
How to i go about doing so?
Cheers, Dean

AndrewT 13th February 2011 02:16 PM

Check the DC resistance of the voice coil. Does not apply to Piezo tweeter.
Stick a capacitor in series with the tweeter.
Connect the series combination to an audio amplifier.
Listen as you slowly turn up the volume.

You need to select the capacitor value to suit the tweeter impedance and also the tweeter passband.

10uF with an 8ohm tweeter gives f-3dB~2kHz and falls off @ 20dB/decade for frequencies below roll off.


All times are GMT. The time now is 09:35 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki