Pace MBT-100

HaLo6 · 20th August 2009, 12:15 PM

awww...first post in a new forum... I bought an MBT-100 off ebay and they neglected to send me the 5x20mm 1.6A fuse or the holder? Does anyone know where I could source these two parts?

454Casull · 5th September 2009, 05:37 AM

digi-key
mouser
newark
ebay
local electronics store
apexjr

Enzo · 5th September 2009, 11:14 PM

The fuse is the easy part.

Did you contact the seller to ask if it is lying on their desk?

You may find a fuse cap to fit in the existing holder, but they are not all alike, so open it up and find the brand of holder and its dimensions. if you casn find the same model holder in Mouser or the others, order it and just use the cap.

it is also possible you can find a similar holder that will fit in place of the original, and you can replace th entire holder. believe me I have done it in many amps.

20th August 2009, 12:15 PM	#1
HaLo6 diyAudio Member Join Date: Dec 2008	Pace MBT-100 awww...first post in a new forum... I bought an MBT-100 off ebay and they neglected to send me the 5x20mm 1.6A fuse or the holder? Does anyone know where I could source these two parts?

5th September 2009, 05:37 AM	#2
454Casull diyAudio Member Join Date: Jan 2004 Location: Toronto, ON, Canada	digi-key mouser newark ebay local electronics store apexjr __________________ Building a 2.1 system out of a 3/4"x4'x8' sheet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pace MBT-100 Manual?	HaLo6	Parts	0	27th July 2009 10:30 PM
Engineering optimal PRaT (Pace, Rhythm, and Timing)	hollowman	Digital Source	14	24th March 2008 11:20 AM
Pace soldering/rework station	speakerguy79	Parts	4	31st May 2007 06:54 PM
Pace Soldering Station	Devil_H@ck	Parts	17	30th August 2004 06:35 PM
PACE MBT Rework Station on Ebay	damonpip	Swap Meet	1	14th December 2003 11:48 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th September 2009, 11:14 PM	#3
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	The fuse is the easy part. Did you contact the seller to ask if it is lying on their desk? You may find a fuse cap to fit in the existing holder, but they are not all alike, so open it up and find the brand of holder and its dimensions. if you casn find the same model holder in Mouser or the others, order it and just use the cap. it is also possible you can find a similar holder that will fit in place of the original, and you can replace th entire holder. believe me I have done it in many amps.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)