Help! Adcola Soldering Iron.... ????

GlidingDutchman · 10th May 2009, 08:40 AM

Hi all

A few days ago a friend of mine gave new a very nice vintage soldering iron.

Its an ADCOLA 24v, 50W, 50Hz, L444, Electronic Control Iron.

I would like to know how does one change the tip on this iron. It seems to be press-fitted as there is no screws that holds it nor any mounting device.

Any ideas appreciated!

Spiny · 10th May 2009, 06:36 PM

Maker :-

L & M Products

The 444 tip is the same as the current K2000 range according to the site and fits with a Stainless steel shim - Pulls out?? maybe

Maybe an email to the makers will get an answer

alan

GlidingDutchman · 12th May 2009, 10:54 AM

Thank you Spiny!

I mailed them and they replied with a good amount of information. Seems there is still service backup for these old tools. Old but great.

10th May 2009, 08:40 AM	#1
GlidingDutchman diyAudio Member Join Date: Nov 2007	Help! Adcola Soldering Iron.... ???? Hi all A few days ago a friend of mine gave new a very nice vintage soldering iron. Its an ADCOLA 24v, 50W, 50Hz, L444, Electronic Control Iron. I would like to know how does one change the tip on this iron. It seems to be press-fitted as there is no screws that holds it nor any mounting device. Any ideas appreciated!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
42 VAC soldering iron	Jan Dupont	Parts	2	8th August 2008 04:48 PM
Soldering iron	beerman	Chip Amps	27	2nd April 2007 11:12 PM
soldering iron	jaudio	Parts	15	17th March 2006 08:22 PM
For those of you in the UK who need a new soldering iron	5th element	Parts	2	26th March 2004 11:58 AM
What soldering Iron?	sleepy	Everything Else	27	23rd October 2002 11:37 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th May 2009, 06:36 PM	#2
Spiny diyAudio Member Join Date: Feb 2008	Maker :- L & M Products The 444 tip is the same as the current K2000 range according to the site and fits with a Stainless steel shim - Pulls out?? maybe Maybe an email to the makers will get an answer alan

12th May 2009, 10:54 AM	#3
GlidingDutchman diyAudio Member Join Date: Nov 2007	Thank you Spiny! I mailed them and they replied with a good amount of information. Seems there is still service backup for these old tools. Old but great.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)