|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Equipment & Tools From test equipment to hand tools |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
15th September 2008, 02:07 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2004
Location: Anonymityville
|
Tektronics 2225: No power
I just picked up a junked Tektronics 2225 scope from work. When I plug the unit in it will not power up, not even a hint of life.
I've checked the fuse and did a little probing on the PS board. The mains is getting through to on/off switch and I measured roughly 60VDC across the large cap on the vertical PS board. Is there a common failure for these units that might cause this? It looks pretty clean inside, no dust build-up or anything. I really need a scope so I hope there is a simple fix. If not, I'll have to give it up for parts. Pic of inside
__________________
"If you don't like funerals don't kick sand in ninja's face." |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tektronix 2225 good enough for amp projects ? | aroS3 | Parts | 4 | 23rd June 2007 05:51 AM |
| Jbl 2225 H | bluesman | Swap Meet | 0 | 23rd April 2006 11:40 PM |
| Tektronics 564B Scope Specs???? Anyone?? | Zero Cool | Equipment & Tools | 5 | 23rd April 2006 10:58 PM |
| Tektronix 2225 | jasont | Parts | 8 | 14th October 2004 12:28 PM |
| Tweaking Marantz 2225 | faxurda | Solid State | 1 | 23rd October 2003 08:50 AM |
| New To Site? | Need Help? |
| Page generated in 0.07082 seconds (69.26% PHP - 30.74% MySQL) with 10 queries |
