Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

Ultrasonic Cleaning PCB's & Controls?
Ultrasonic Cleaning PCB's & Controls?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd February 2007, 06:50 PM   #1
Zero Cool is offline Zero Cool  United States
diyAudio Member
 
Zero Cool's Avatar
 
Join Date: Sep 2004
Location: MN
Default Ultrasonic Cleaning PCB's & Controls?

I have a very large ultrasonic cleaning unit and i am wondering if i can use it to clean PCB's and Volume controls? I have only used it for cleaning non electrical parts previously.

I have a large 24 channel mixing board i am rebuilding that has seen years of club gunk. Each channel strip will fit in the cleaner one at a time. I am wonding if i can just drop the the whole PCB into the cleaner without harm?

What fluid should i use for cleaning? Water and a mild dish soap comes to mind, but would that be best? how about denatured alcohol or some other fluid? whatever i use must not harm the potentiometers or any components on the PCB.


Zc
  Reply With Quote
Old 3rd February 2007, 10:28 PM   #2
XEAGLEKEEPER is offline XEAGLEKEEPER  United States
diyAudio Member
 
XEAGLEKEEPER's Avatar
 
Join Date: Jan 2006
Location: central Iowa
I would'nt use water and detergent(dishsoap). potentiometers would need to be relubricated.The cleaning medium would need to be fast drying..no residue...component freindly...you could try alcohol but on something else as a test.Denatured I believe will leave a residue as well as IPA. Might give technical Ethanol (ethyl)(everclear)a whirl.
__________________
Ret. USAF... AKA- Avionic *** Solder slinger for hire...***
  Reply With Quote
Old 3rd February 2007, 10:56 PM   #3
anatech is offline anatech  Canada
diyAudio Moderator
 
anatech's Avatar
 
Join Date: Jun 2004
Location: Georgetown, On
Ultrasonic Cleaning PCB's & Controls?
Hi Zero Cool,
Having done this, I'll let you know what to watch for.

Doesn't matter what you use. All switches, controls and electrolytic caps must be removed. Some older transistors are not really sealed that well. WD-40 will kill them. Don't ask.

What I would do is use Simple Green in a 10:1 dilution. Remove the controls and switches. Let 'er rip. Rinse and dry. At least shake out the water before drying.

Now, old caps are probably bad or going anyway. Replace them at this point. Reinstall the other parts. Try one board to see if you will have transistor troubles. Some old Neves are like that. You could take the opportunity to clean the controls and switches while they were off the board.

The rubber seals on electrolytic caps are better these days. WD-40 will destroy them. Any cleaner would probably get rid of the lubricants in switches and controls. Don't immerse them for that reason.

-Chris
  Reply With Quote
Old 3rd February 2007, 11:12 PM   #4
Zero Cool is offline Zero Cool  United States
diyAudio Member
 
Zero Cool's Avatar
 
Join Date: Sep 2004
Location: MN
the controls and switches are what i need to clean! i figured i would have to relube them.

This is not an old board like a neve. its an EV club mixer. nothing great. but i need to get it cleaned up and fullly working again. the grease in the controls has dried and made them hard to turn on many and the sliders have lots of dirt in them. the board is not worth replacing all the controls. even putting the time into it to remove each channel is not really worth it and i wouldnt even do it but i am giving the board to a friend when i get it done so i am trying to find a solution to minimise how much time and money i have to out into it.

I have been finding lots of aqueous products ment for ultrasonic PCB cleaning, but everything seems to be in the UK, i cant seem to find anything here in the US....Still looking.


Zc
  Reply With Quote
Old 3rd February 2007, 11:28 PM   #5
anatech is offline anatech  Canada
diyAudio Moderator
 
anatech's Avatar
 
Join Date: Jun 2004
Location: Georgetown, On
Ultrasonic Cleaning PCB's & Controls?
Hi Zero Cool,
You need to avoid any alcohol based cleaners that will attack the lubricants, rubber seals and some plastics.

I would still use Simple Green, but removing these parts is easier than trying to clean and relube them, never mind getting the cleaner and water out!

For a quick and dirty, run around the controls and use De-Ox-Id or WD-40 (sparingly). There is no easy way to do a proper job.

-Chris
  Reply With Quote
Old 4th February 2007, 01:21 PM   #6
eeka chu is offline eeka chu  United Kingdom
diyAudio Member
 
Join Date: Nov 2003
Location: England
I'd use distilled water and a commercial electronics detergent solution
  Reply With Quote

Reply


Ultrasonic Cleaning PCB's & Controls?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ultrasonic Piezo for animals haw Multi-Way 5 18th July 2009 01:12 PM
Ultrasonic Cleaning?????? grhughes Equipment & Tools 25 7th March 2009 01:31 PM
Higher than 22k, or ultrasonic? jahhn Multi-Way 34 2nd October 2007 09:43 PM
Ultrasonic heaters DHT112A Tubes / Valves 53 10th June 2006 11:59 AM
ultrasonic sensors sss Everything Else 4 16th May 2006 02:42 PM


New To Site? Need Help?

All times are GMT. The time now is 02:18 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki