Dremel Trio ... sufficient tool? Dremel Trio ... sufficient tool? - Page 4 - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

Dremel Trio ... sufficient tool?
Dremel Trio ... sufficient tool?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 9th October 2012, 11:30 PM   #31
dchisholm is offline dchisholm  United States
diyAudio Member
dchisholm's Avatar
Join Date: Mar 2011
Location: St Louis, Mo
Originally Posted by dangus View Post
I disagree on the second-hand router thing . . .
I have mixed feelings on this. As a hobbyist, the only power tool I have legitimately "worn out" (i.e., without damaging it from accident or abuse) were my first two routers - mid-grade models from Sears, late 1970's/early 80's. Based on that experience I'd be reluctant to put any money into a used tool regardless of how tight and smooth the bearings seem to be.

On the other hand - I have a Black & Decker professional router, circa late 1980's, that I got when a cabinet shop went out of business. The model number might be "444". I'm VERY pleased with that investment in a second-hand tool.

(It was pretty dirty and caked with contact cement, and the cord had been chewed up by a router bit or saw blade. But the bearings seemed tight and I couldn't hear or feel brush drag. As I recall I got it for $10 or $15 in the mid 1990's - I think the damaged power cord scared off the other bidders. I have replaced the cord and power switch (twice), and the brushes, but I'm still using the tool quite regularly almost 20 years later. It's not as tight as my Porter-Cable 690 as far as collet runout and holding settings, but a heavy cut that makes the PC say "I'm gonna die!" is no problem for the B&D - it says, "Gimme more of that!".

Much of the time I use whichever machine is most convenient. When I'm making a jig or pattern where I want to hold dimensional tolerances to 0.010" or better I use the PC, at least for the finish cut. If I want to make a lot of sawdust in a hurry, like a speaker cutout in a single pass, I grab the B&D.)

I'd have to think about that "only tool you need" statement. Certainly the most versatile tool, and probably the tool I'd put the greatest time and money into. I can't imagine doing speakers without a circular saw. An inexpensive one will do, if you you're willing to make final cuts with the router, but a good one will save a lot of time. And yes, the driver drill.

  Reply With Quote


Dremel Trio ... sufficient tool?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PCB drilling with a dremel Krisfr Construction Tips 33 8th January 2011 01:43 AM
Jobmate Dremel - For Canadians EdT Everything Else 0 22nd February 2007 06:00 PM
Is the 1.1A diode sufficient? w00t Chip Amps 2 16th August 2004 05:52 PM
Demagnetising Tool/Tool Demagnetiser mrfeedback Everything Else 30 4th October 2002 11:53 PM
Tools? Dremel or Rotozip? Pyro Equipment & Tools 7 16th March 2002 03:43 PM

New To Site? Need Help?

All times are GMT. The time now is 06:55 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio