Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

Would this be OK
Would this be OK
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st March 2012, 10:58 PM   #1
robgilmo is offline robgilmo  United Kingdom
diyAudio Member
 
Join Date: Aug 2011
Default Would this be OK

to test the bias settings and dc offset in an amplifier?

DIGITAL MULTIMETER VOLTMETER AMMETER TESTER | eBay
  Reply With Quote
Old 1st April 2012, 12:55 AM   #2
tvrgeek is offline tvrgeek  United States
diyAudio Member
 
Join Date: Dec 2009
Location: Md
It looks fine. Bias is normally set at about 125 mA, sometimes more, sometimes less.
As it is DC, you don't need to worry about the poor frequency response of a non-true RMS meter. If it is a BJT amp, you are usually just measuring voltage across the .22 Ohm emitter resistors. If a MOSFET sometimes you replace a fuse with the meter and read current.

You should not be adjusting offset. It should be designed in. Sometimes you can adjust symmetry, which to do correctly required a spectrum analyzer or distortion meter.
  Reply With Quote
Old 1st April 2012, 09:09 AM   #3
robgilmo is offline robgilmo  United Kingdom
diyAudio Member
 
Join Date: Aug 2011
Thanks, I have read that it does no harm to test the offset at the speaker terminals.
  Reply With Quote
Old 1st April 2012, 01:13 PM   #4
tvrgeek is offline tvrgeek  United States
diyAudio Member
 
Join Date: Dec 2009
Location: Md
No harm and a smart thing to check. But, do you know how much you should tolerate? How it changes with the amps temperature? Be careful looking for trouble where there is none. "don't fix it if it ain't broke"
  Reply With Quote

Reply


Would this be OKHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


New To Site? Need Help?

All times are GMT. The time now is 06:24 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki