Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

Ungar 4624 soldering station
Ungar 4624 soldering station
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 8th December 2010, 03:08 PM   #1
FireII is offline FireII  United States
diyAudio Member
Join Date: Apr 2010
Default Ungar 4624 soldering station

I have Ungar 4624 soldering station. The heating element on the soldering iron went out and it is impossible to find a new one. I'm trying to convert the pin configurations on a WEP51 iron to match the pin configuration on the 4624. Does anyone have any information on how this thing works? Schematics?
  Reply With Quote
Old 23rd January 2013, 08:29 PM   #2
Telemoxy is offline Telemoxy
diyAudio Member
Join Date: Oct 2010
Thumbs up Ungar 4624 Schematics

Here is what I have. If you figure out how to adapt another brand to the Ungar I would like to know.
Attached Files
File Type: pdf Ungar 4624 Soldering Desoldering Station.pdf (555.2 KB, 98 views)
  Reply With Quote
Old 10th March 2014, 10:56 PM   #3
eleeco is offline eleeco
diyAudio Member
Join Date: Mar 2014
Hello... I had the same issue. Here's what I did... I adapted the PES51 50W 24V 350F-850F Weller Iron. Nice replacement for less than $40. The wiring is all different so you have to mod 4 out of the 5 connections. Here's what you do... remove circuit board 1. Remove the tool connector from the rear by spreading locks on both sides of rear. After you've removed the board note the original wire locations on the board. (Blk.,Wht.,Grn.,and two Blu's) The Blk and Wht are the 24V AC. Grn is ground. Both Blu are for sensor and calibration. Desolder all but the Blk wire as that is the only one that's ok. Then remove the white sealer around the rear of connector. I used heat shrink and hot glue to secure when done. The PES Soldering Iron uses a center pin while the original 90xx does not. To solve this I went to Radio Shack and just purchased a 9 pin Female Din just to rob one pin out of it. (I didn't have the right extractor tool to just move the pin) You have to pinch the soldered rear carefully when done to help secure and lock it otherwise it may be loose as the pin from Radio Shack is slightly different but fits tool fine. I further used the hot glue to help secure. Now use the wiring from the PES to resolder original leads into their appropriate spot. The PES uses pins 2 & 6 for the 24V. I attached the new pinout referencing original colors to see how they're modified. But if you use my method the colors won't match when done. Use the diagram in the PES manual if you want to confirm new pinout. (In PES51 manual the 24V listed as 2 reds, offset is orange & yellow, Ground listed but no color reference) And there you have it...one PES51 solder iron adapted to 4624 solder station! Let me know if anyone needs the PES manual...
Attached Images
File Type: jpg PES51 6 pin din adapted pinout.jpg (28.1 KB, 100 views)
  Reply With Quote
Old 10th March 2014, 11:18 PM   #4
eleeco is offline eleeco
diyAudio Member
Join Date: Mar 2014
...it's also worth mentioning that if your old 90xx iron went out like mine did it may also have taken the 4624's TRIAC out with it. I had to also replace this first to restore power to PCB 1. So check for 24V AC on PCB 1 at disassemble. The TRIAC is the big AC transistor on the board. May be shorted or open.
  Reply With Quote


Ungar 4624 soldering stationHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Soldering tips for soldering station BEST PRICE, FREE SHIPPING, 15% discount vtech9815 Vendor's Bazaar 0 27th January 2010 05:40 PM
Soldering Station I'd like to built Renatomcl Equipment & Tools 1 15th April 2009 02:15 AM
WTB soldering station prezden Swap Meet 6 28th November 2008 09:45 PM
This soldering station OK for smd? johnthedoctor Parts 16 10th May 2006 12:30 AM
which soldering station? David B Parts 11 15th May 2005 04:59 AM

New To Site? Need Help?

All times are GMT. The time now is 06:37 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio