Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

LeCroy 9400 malfunction
LeCroy 9400 malfunction
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 10th May 2010, 01:04 PM   #1
kavermei is offline kavermei  Belgium
diyAudio Member
kavermei's Avatar
Join Date: Jan 2005
Location: Lokeren, Belgium
Send a message via MSN to kavermei
Default LeCroy 9400 malfunction


has anyone any experience with the LeCroy 9400 scope, especially concerning typical failures & fixes?

I bought one for a ridiculously low amount in an antique shop, but one of the channels is defective. The input signal gets to the ADC board intact but the ADC only picks up noise and hum, as if its input were floating. I haven't been able to pinpoint the failure any more than this.

Never send a human to do a machine's job. --Agent Smith
  Reply With Quote
Old 10th May 2010, 02:29 PM   #2
star882 is offline star882  United States
diyAudio Member
star882's Avatar
Join Date: Mar 2007
Check for bad connections.
"Fully on MOSFET = closed switch, Fully off MOSFET = open switch, Half on MOSFET = poor imitation of Tiffany Yep." - also applies to IGBTs!
  Reply With Quote


LeCroy 9400 malfunctionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LeCroy 9354AM oscilloscope power supply Craig405 Parts 3 19th December 2011 07:34 AM
VPI SDS Malfunction? korneluk Analogue Source 1 21st December 2010 01:27 PM
WANTED: LeCroy 93xx series DSO Ultima Thule Swap Meet 1 21st November 2006 10:42 PM
Z-680 Sub Malfunction HELP PLZ!!! corsairfire Subwoofers 3 23rd June 2005 06:36 AM

New To Site? Need Help?

All times are GMT. The time now is 11:33 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio