Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

Needed: Schematic for Weller EC1002
Needed: Schematic for Weller EC1002
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th September 2009, 08:53 PM   #1
babblefish is offline babblefish  United States
diyAudio Member
Join Date: Aug 2009
Default Needed: Schematic for Weller EC1002

I'm trying to repair a Weller EC1002 (not EC1002S) soldering station, but cannot seem to find a schematic for the control board. All I've found so far is this: http://bama.edebris.com/manuals/weller/ but it is of no use because they only show the EC1002S and even then, the manual does not have any schematics.

The station that I have is brand new (has only soldered maybe 3 joints) but has stopped getting hot. The fuse is good, the LED lights up, but the iron will not heat up. There is nothing burned on the PC board or anywhere else inside the case. The hand piece cord is perfect (on the outside, anyway). Anyone have any clues?
  Reply With Quote
Old 8th September 2009, 05:01 AM   #2
Enzo is offline Enzo  United States
diyAudio Member
Join Date: Sep 2004
Location: Lansing, Michigan
If it is brand new, didn;t it come with a warranty? Do you still have all the little cards and stuff that came with it to tell you how and where to get warranty service? You generally don;t have to register your unit for warranty coverage, but you will need "proof of purchase" which means a copy of the sales invoice.

And the place that sold it to you might even just exchange it, and then THEY can deal with returning it to Weller.

You can also CALL Weller and ask if the schematic is available, they will probably send it to you.

As to troubleshooting it, it is a soldering iron. Some sort of low voltage current is sent to the iron from the base unit. Is anything present on the connector then? Look at the connector itself where the iron plugs into the base unit. ANy of the connector pins pushed back from their proper position - look at both male and female pins - iron and base unit connectors.. And on the hand piece, the heater itself will have continuity or not.

When something burns up, it is apparent to the eye. But the fact that the cord LOOKS good means nothing. It could of course be some sort of sensor glitch, but more likely it is just a failed connection or an open heater or something.
  Reply With Quote
Old 9th September 2009, 08:48 AM   #3
babblefish is offline babblefish  United States
diyAudio Member
Join Date: Aug 2009
Thanks for your response Enzo. Unforturnately, the iron, although new, is old. That is to say, it is NOS (new old stock) so the warranty is long gone. It's been in storage since new and has just recently been put into service. Regardless, I posted before doing more thorough testing. Turns out the heater element is bad (open). Just goes to show that just because something is new, doesn't mean it's good!
  Reply With Quote


Needed: Schematic for Weller EC1002Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
hakko vs. weller metebalci Parts 36 27th July 2009 07:27 AM
Weller soldering iron problem rtarbell Parts 2 23rd June 2007 05:48 AM
FS Weller WS81 Soldering Station powertriode Swap Meet 1 19th June 2006 02:10 PM
Weller/Portasol P2C parts? obscurion Parts 2 4th February 2005 03:14 AM
FS : Weller Butane Soldering Iron pho_boi Swap Meet 0 8th January 2005 11:32 AM

New To Site? Need Help?

All times are GMT. The time now is 06:40 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio