• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Output Amplifier for Ribbon Loudspeakers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have Part 2 (December 1992) part of this amplifier article. This amplifier has an output power of 110 watts into 0.4 ohms. That is right, 0.4 ohms.

I am after Part 1 (November 1992) article. If you have it, can you please scan it for me and send it to me.

Also, at the end of the Part 2 article, T. Giesberts talks about a modified version of this amplifier that is suitable for use with 4 to 8 ohm speakers. Was this article published and if so, when was it published in Elektor Electronics.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.