Saps-400

DoctorC · 1st July 2008, 09:25 AM

Hi,
I just read the article in Elektor 06/2008 about this smps psu.
Unfortunately there is no complete schematics.
The control board is missing.
Can anybody suggest some schematics for a PWM controller with feedback to adapt to the rest of the psu?

Thanks
Enrico

luka · 2nd July 2008, 06:45 AM

Hi

Oh god, cacn't you find one schematics on this forum? Did you even shearched? Why copy something you can make yourself.

DoctorC · 2nd July 2008, 06:56 AM

I searched and read a lot and not only the forum.
What I didn't understand is if any PWM controller can be fitted to the rest of the SAPS-400.
And what about the feedback loop.
I'm new to SMPS, still learning theory and reading as much as I can, sorry if I wrote something stupid.
I just wanted an example to see how it can be connected and what are the parameters.

Enrico

luka · 2nd July 2008, 07:09 AM

Hi

The only problem is that this smps is a selling unit, they can't give you everything, and control board is more important then main board. I don't know what did they used but you could use any, again it all depends on what they have. Some with feedback. There are many ways to do both parts (control and feedback), but any of them could be used, so not much help i'm affreid

DoctorC · 2nd July 2008, 07:13 AM

that's already something to start with.
So I can build a "base" based on their schematics and plug in different controllers to test.
Thanks for your help

Enrico

luka · 2nd July 2008, 07:16 AM

Hi

Their is some what more complex then needed, you could use less parts and it will still work great

DoctorC · 2nd July 2008, 07:22 AM

Ok. I will give a look at the schematics.
Thanks

DACMan1 · 3rd July 2008, 08:58 PM

I am planning to design something similar this weekend. Might just post schematic and pcb here if there is enough interest...

luka · 3rd July 2008, 09:36 PM

Hi

If you can make it to work, please do

DoctorC · 4th July 2008, 05:56 AM

Hi DACMan1,

there is a lot of interest

Please post it

1st July 2008, 09:25 AM	#1
DoctorC diyAudio Member Join Date: Dec 2004 Location: Warszawa	Saps-400 Hi, I just read the article in Elektor 06/2008 about this smps psu. Unfortunately there is no complete schematics. The control board is missing. Can anybody suggest some schematics for a PWM controller with feedback to adapt to the rest of the psu? Thanks Enrico

2nd July 2008, 06:45 AM	#2
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	Hi Oh god, cacn't you find one schematics on this forum? Did you even shearched? Why copy something you can make yourself. __________________ home page @ http://www.classdaudio.co.cc @ 24/7 all year long I FEEL SLOVENIA

2nd July 2008, 07:09 AM	#4
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	Hi The only problem is that this smps is a selling unit, they can't give you everything, and control board is more important then main board. I don't know what did they used but you could use any, again it all depends on what they have. Some with feedback. There are many ways to do both parts (control and feedback), but any of them could be used, so not much help i'm affreid __________________ home page @ http://www.classdaudio.co.cc @ 24/7 all year long I FEEL SLOVENIA

2nd July 2008, 07:16 AM	#6
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	Hi Their is some what more complex then needed, you could use less parts and it will still work great __________________ home page @ http://www.classdaudio.co.cc @ 24/7 all year long I FEEL SLOVENIA

3rd July 2008, 09:36 PM	#9
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	Hi If you can make it to work, please do __________________ home page @ http://www.classdaudio.co.cc @ 24/7 all year long I FEEL SLOVENIA

2nd July 2008, 06:56 AM	#3
DoctorC diyAudio Member Join Date: Dec 2004 Location: Warszawa	I searched and read a lot and not only the forum. What I didn't understand is if any PWM controller can be fitted to the rest of the SAPS-400. And what about the feedback loop. I'm new to SMPS, still learning theory and reading as much as I can, sorry if I wrote something stupid. I just wanted an example to see how it can be connected and what are the parameters. Enrico

2nd July 2008, 07:13 AM	#5
DoctorC diyAudio Member Join Date: Dec 2004 Location: Warszawa	that's already something to start with. So I can build a "base" based on their schematics and plug in different controllers to test. Thanks for your help Enrico

2nd July 2008, 07:22 AM	#7
DoctorC diyAudio Member Join Date: Dec 2004 Location: Warszawa	Ok. I will give a look at the schematics. Thanks

3rd July 2008, 08:58 PM	#8
DACMan1 diyAudio Member Join Date: Jun 2006	I am planning to design something similar this weekend. Might just post schematic and pcb here if there is enough interest...

4th July 2008, 05:56 AM	#10
DoctorC diyAudio Member Join Date: Dec 2004 Location: Warszawa	Hi DACMan1, there is a lot of interest Please post it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read