Elektor Nov 93 - Power Mosfet Matcher Article

Zero Cool · 4th May 2008, 06:11 PM

Does anyone have a copy of the Elektor Nov 93 issue of the Power Mosfet Matcher? I would like to read the article and Elector on has issues to 2000 online.

Elektor circuit (Giesberts) for the power mosfet matcher? It tests 2 x N channel and 2x P channel at the same time. Was published in Nov 93 issue.

studiot · 8th May 2008, 08:30 PM

If you are still interested let me have an email by pm I can send a scan to.

Zero Cool · 9th May 2008, 12:33 PM

I tried to send you an email and it says you are not allowed to receive emails.

Please email me at (address now removed as contact has been made)

Thanks

Zc

jackinnj · 9th May 2008, 12:46 PM

There is a great MOSFET matching article on the passidy website -- if you can't locate the Elektor version.

I initially did my LM4702 article using a pair of Renesas Lateral MOSFETs with a 2 N and P devices just pulled out of the box. Results were pretty good, but when I soldered in a pair of devices matched to a few mV the THD% went down as low as I could measure it.)

Zero Cool · 9th May 2008, 01:07 PM

Oh yes i have read the article on the pass website. I have read several others and several threads on the subject here. Now i am curious about the elektor article.

I see that studiot is a new poster and thats why i cant email him. i think you need 10 post's before you can accept emails????

studiot · 9th May 2008, 02:14 PM

"i think you need 10 post's before you can accept emails????"

Haven't figured the private messaging system here yet but it will take me a deal of time to get to 10

I come to bury Caesar not to praise him....
(translation)
I come generally for information not to preach.

Anyway, have sent a test message to the posted address will forward the scans soon.

Cal Weldon · 9th May 2008, 03:39 PM

It's usually 5 posts before you are released from moderation.

There is no PM service at the moment.

Email address removed from post 3

studiot · 10th May 2008, 08:55 AM

Scan sent, awaiting confirmation of receipt.

Zero Cool · 10th May 2008, 04:53 PM

I have not received any emails yet! tetech2@doitnow.com

Zero Cool · 12th May 2008, 11:24 PM

Thank you I received the article! Looks interesting.

Zc

4th May 2008, 06:11 PM	#1
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Elektor Nov 93 - Power Mosfet Matcher Article Does anyone have a copy of the Elektor Nov 93 issue of the Power Mosfet Matcher? I would like to read the article and Elector on has issues to 2000 online. Elektor circuit (Giesberts) for the power mosfet matcher? It tests 2 x N channel and 2x P channel at the same time. Was published in Nov 93 issue.

9th May 2008, 03:39 PM	#7
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	It's usually 5 posts before you are released from moderation. There is no PM service at the moment. Email address removed from post 3 __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ELEKTOR September article	Pierre	Elektor	59	21st September 2007 06:58 AM
Elektor op-amp front-end with mosfet CF output stage	Dusk	Elektor	1	5th April 2006 04:09 AM
Elektor DRM article	rpapps	Everything Else	9	9th November 2005 11:55 PM
Elektor- MOSFET 'valvesound' amp opinion	mikee12345	Solid State	0	7th August 2004 05:53 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

8th May 2008, 08:30 PM	#2
studiot diyAudio Member Join Date: May 2008	If you are still interested let me have an email by pm I can send a scan to.

9th May 2008, 12:33 PM	#3
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	I tried to send you an email and it says you are not allowed to receive emails. Please email me at (address now removed as contact has been made) Thanks Zc

9th May 2008, 12:46 PM	#4
jackinnj diyAudio Member Join Date: Apr 2002 Location: Llanddewi Brefi, NJ	There is a great MOSFET matching article on the passidy website -- if you can't locate the Elektor version. I initially did my LM4702 article using a pair of Renesas Lateral MOSFETs with a 2 N and P devices just pulled out of the box. Results were pretty good, but when I soldered in a pair of devices matched to a few mV the THD% went down as low as I could measure it.)

9th May 2008, 01:07 PM	#5
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Oh yes i have read the article on the pass website. I have read several others and several threads on the subject here. Now i am curious about the elektor article. I see that studiot is a new poster and thats why i cant email him. i think you need 10 post's before you can accept emails????

9th May 2008, 02:14 PM	#6
studiot diyAudio Member Join Date: May 2008	"i think you need 10 post's before you can accept emails????" Haven't figured the private messaging system here yet but it will take me a deal of time to get to 10 I come to bury Caesar not to praise him.... (translation) I come generally for information not to preach. Anyway, have sent a test message to the posted address will forward the scans soon.

10th May 2008, 08:55 AM	#8
studiot diyAudio Member Join Date: May 2008	Scan sent, awaiting confirmation of receipt.

10th May 2008, 04:53 PM	#9
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	I have not received any emails yet! tetech2@doitnow.com

12th May 2008, 11:24 PM	#10
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Thank you I received the article! Looks interesting. Zc