Replacement Cap Values for C3, C4, C9, & C10

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
The Manual States "If replacing these capacitors, the value shall be higher than 0.1uf"

So to make sure the language translation is correct,
They (Elekit) do not want a value Less than .1 uf correct?


It seems to me that increasing the caps to .2 uf or even .3 uf
would move the low end down and increase the base response.

I'm saying this because I have done the same in other
audio circuits and have good results

Any issue with doing this?
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.