Elekit PU-2112 with Scanspeak 5F8422T01

[vkung]

The 5F/8422T01 is the smallest ScanSpeak speaker component. Also 5F/8422T01 is the Rolls Royce of 5cm speaker driver. $56 per piece.
- 22 mm titanium voice coil,
- machined magnet parts,
- neodymium magnet,
-one-piece paper cone, foam surround.

5F/8422T01 is a good match for PU-2112 digital amp. Pretty good sound.

Elekit PU-2112 with Scanspeak 5F8422T01 2inches/5cm

This system will demo in 2014 Montreal Audio Show and 2014 AXPONA.

 

[juanito]

Hello, I know this is an old post but PAM8008 chip on Elekit PU-2112 board is still operative. I see you are using 6V (4x1,5v batteries), but this chip is recommend at 2.5 to 5.5 volts, whereas 6v is an "absolute maximum voltage", in words of DIODES Inc. Does this apply for this Elekit kit you have? any issues with 6v?
Thanks!
BR John

 

[vkung]

no issue at all