diyAudio (
-   The diyAudio Store (
-   -   2U w/Quasi Heatsink and ventilation (

nycavsr2000 31st December 2012 03:58 AM

2U w/Quasi Heatsink and ventilation
Some questions, regarding this unit: 2U Quasi-Heatsink Chassis in Tube Project Style - One solid cover, one vented cover - Full Width with Quasi Heatsinks - Chassis

1. Is it okay to have the vented panel on top? Looks like it.

2. Do you sell the Quasi Heatsinks separately. It could be useful to add a divider to the enclosure.

3. Are all the panels 3mm thick except for the front panel?



Jason 7th January 2013 08:30 AM

1. It's up to you :)
2. No.
3. Yes, all 3mm alu. The quasi heatsinks are, if I recall correctly, 10mm or so (total width). But we for some reason don't seem to have measurements on that.

nycavsr2000 7th January 2013 01:50 PM


Thanks for getting back to me.


nycavsr2000 27th January 2013 03:37 AM


Is the height 80mm the inside height or is it actually 80-6 = 74mm?


Jason 27th January 2013 04:30 AM

It's 80mm inside. The top and bottom panels sit on the "sides" of the heatsinks.

Jason 27th January 2013 05:17 AM

You can actually fit one of the regular 40mm deep heatsinsks "inside" - they are 80mm wide and it will be a flush fit.

nycavsr2000 27th January 2013 12:53 PM

So the useable internal space is 415 mm by 280 mm by 80 mm?


All times are GMT. The time now is 02:06 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2