diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   The diyAudio Store (http://www.diyaudio.com/forums/the-diyaudio-store/)
-   -   4U chassis (http://www.diyaudio.com/forums/the-diyaudio-store/223430-4u-chassis.html)

thor61 12th November 2012 07:44 PM

4U chassis
 
Hello everyone ; Would the 4U enclosure stocked in the store have sufficient heat sinks for construction a F5C > P-F5c-2V20 - Pair of F-5c boards (Makes 2 channels; Rev 2.0) - Boards

JojoD818 20th November 2012 01:17 AM

If you will run the F5C in stock bias then yes it is more than enough. I am running an F5 in it's max bias setting and only get about 42*C, the ambient here is around 27*C to 28*C.

If you will run the F5C with a higher bias, that means you will need a bigger power supply and that may be a bit tricky to put together inside a 4U.


All times are GMT. The time now is 09:10 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki