F-5c boards

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
This thread is for discussions about the F-5c boards. For more information on this product, please see the product page below.

Product Page: P-F5c-2V20 - Pair of F-5c boards (Makes 2 channels; Rev 2.0) - Boards
Schematic: http://www.diyaudio.com/forums/imag...mentation/P-F5C-1V20/P-F5C-1V20-schematic.pdf
BOM: http://www.diyaudio.com/forums/images/diy/store/board-documentation/P-F5C-1V20/P-F5C-1V20-bom.xls
Dimensions: http://www.diyaudio.com/forums/imag...entation/P-F5C-1V20/P-F5C-1V20-dimensions.pdf

Threads on diyAudio that relate to this product (If we have missed one, please post it in this thread and we will add it to the list):
* No threads yet - yours could be the first!
 
F5c power stock power ratings !

If cviller's F5c makes 50w at 8 ohm, would I be correct to assume it then will put out 100w into 4 ohm's ? Just wondering how much power it has with or with/out the cascoded front end... If not please explain as my speakers are 4 ohm ! :confused: The boards I speak of are the F5c rev 2.0 from the diy store.
 
Last edited:
If following the schematic posted at the Diy store what can one expect for a average power into 4 ohms ? I just like to know what I can expect from a stock cascoded version utilizing both front and output cascodes. The heatsinks I have are rated at 0.20 c/w also I have 180,000uf @ 40v for the psu. 12 x 15000 ...
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.