Go Back   Home > Forums >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Diodes
Diodes
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th November 2009, 06:39 AM   #1
keantoken is offline keantoken  United States
diyAudio Member
 
keantoken's Avatar
 
Join Date: Aug 2006
Location: Texas
Default Diodes

Diodes

Put simply, a diode is a device that allows current to flow in one direction, but not the other.

Diodes are used most recognizably in rectifiers, in order to convert AC to DC.


Characteristics

Vbr - reverse breakdown voltage. If you put too much voltage across the diode the wrong way (called reverse bias), it will pop. This is the maximum reverse voltage rating.

Vfbr - forward breakdown voltage. This is how much forward-bias voltage the diode can handle.

Vbo - Forward breakover voltage. This is basically how much voltage you have to put across the diode before it will begin to conduct. In silicon diodes, this is typically around 600mV or .6V. For germanium, it's about 300mV or .3V.

Reverse breakover voltage can be virtually any value. However, forward breakover will usually stay within the 0.6V or 0.3V range (depending on whether its silicon or germanium).

Note the separate usage of 'breakover' and 'breakdown'. Breakdown in this context generally means that it's not supposed to happen, e. g. a failure. However, exceeding breakover voltage is normal since this has to happen for the diode to function correctly.


Diode capacitance & Varactors

Diodes show an intriguing characteristic when reverse-biased: their junction capacitance will vary with the amount of voltage applied.

There are diodes made specifically for the purpose of utilizing this variable-capacitance characteristic, and they are know as Varactor diodes.

When reverse biased a varactor diode's junction capacitance will decrease when the voltage across it decreases. Typical capacitance range is around [insert value here] to [insert other value here].

Recifier:

A rectifier takes AC and converts it to DC. Semiconductor rectifiers use diode arrangements (there are also tube rectifiers, but that is for another page) in order to do this.

There are two types of rectifiers - full wave and half-wave.

[insert diagrams of full and half wave rectifiers]

Full-wave rectifiers are the most widely used for their efficiency, and the cost for two extra diodes isn't enough to worry about for most manufacturers.

Zener:

Another useful characteristic of diodes is that when their breakdown point is reached, the voltage across them remains relatively constant.

Zener diodes are specifically made for this purpose. In the case of Zeners, it is perfectly safe to exceed the reverse breakdown voltage and that is their purpose.

Zener diodes are typically used in power supplies where an accurate and stable output voltage is required.

In use, Zeners are typically biased with a reverse current of around 3mA to get it off what is called the 'Zener knee'. It is useful to note that the higher the bias current, the less noisy the Zener is.

Last edited by PedroDaGr8; 23rd January 2010 at 08:39 AM.
  Reply With Quote
Old 28th November 2009, 07:27 AM   #2
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Diodes
Zener:

Another useful characteristic of diodes is that when their breakdown point is reached, the voltage across them remains relatively constant.

With the proviso that the current is limited to ensure the device remains within it's rating.


Zener diodes are specifically made for this purpose. In the case of Zeners, it is perfectly safe to exceed the reverse breakdown voltage and that is their purpose.

If you exceed the voltage rating of the device excess current will flow. It takes only a few millivolts increase to go from zero current flow to destructive current flow.
Voltages below around 5 volt are refered to as Zeners and above this more correctly avalanche diodes (although we all say Zener )
  Reply With Quote

Reply


DiodesHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for some Diodes JoergST Chip Amps 2 31st August 2009 09:16 AM
diodes changsecho Solid State 1 31st May 2008 04:32 PM
Old Diodes betweenpie Tubes / Valves 2 3rd June 2007 04:06 PM
what to look for - diodes Raj1 Parts 1 18th September 2003 01:44 AM


New To Site? Need Help?

All times are GMT. The time now is 10:35 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki