Go Back   Home > Forums > General Interest > diyAudio.com Articles
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Comment
 
Article Tools Search this Article
Old 17th August 2011, 05:41 PM  
Nelson Pass is offline Nelson Pass  United States
The one and only
 
Nelson Pass's Avatar
 
Join Date: Mar 2001
Default Burning Amplifier BA-3

Introduction


In the BA-1 and BA-2 projects we constructed two different amplifiers using very similar input and voltage gain stages (aka the “front ends”), but used them to drive two different Class A Mosfet follower output stages. Now we are going to flip this approach and begin...

Last edited by Jason; 14th September 2011 at 10:22 AM.
  Reply With Quote
21st November 2012
Pocoyo's Avatar
Pocoyo
diyAudio Member
why papa always use panasonic 3w ? is there something secial with this resistor ?
14th April 2013
n3szd's Avatar
n3szd
diyAudio Member
I would love to attend.. Kinda a dream come true
16th July 2013
hendriono
diyAudio Member
Very nice design... Thanks Nelson Pass...
2nd June 2014
pcbchina
diyAudio Member
Really love to see nelson flexing his mighty pen in action in this forum,
makes mortal like me think. The maestro sway his magic wand once more.
27th June 2014
Nelson Pass's Avatar
Nelson Pass
The one and only
That sounds a little phallic...

But I'll do something soon.

13th October 2016
Manolo47
diyAudio Member
Wow 10 uf, that's high, can one get away with a lower capacitance output cap? Thanks!
14th October 2016
woody
diyAudio Member
You could " get away with " a smaller value but I
gather the rule of thumb is to use a much larger
cap than is really needed. Here is an old but still
excellent article about audio caps. http://www.waltjung.org/PDFs/Picking_Capacitors_1.pdf
14th October 2016
Manolo47
diyAudio Member
This cap ought to be low pas filter. Why not put a 50k -100k resistor to ground after it, with that a 1 to 2 uf cap would work. And even without that lets say the amp. has an input impedance of 50k, that would also work. Unless the cap does something more.
14th October 2016
woody
diyAudio Member
Because the output bank already has an input impedance of about 47k ohms in the SE version and the push pull version will have an input impenitence of closer to 2k.
14th October 2016
woody
diyAudio Member
Sorry the input impenitence of that PP output stage may not be as low as I first thought but it will be at least 7.5k or lower.

Comment


Hide this!Advertise here!
Article Tools Search this Article
Search this Article:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 02:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki