pj panel help - diyAudio
Go Back   Home > Forums > General Interest > Everything Else > The Moving Image > DIY Projectors

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st February 2006, 12:15 AM   #1
diyAudio Member
 
Join Date: Apr 2005
Location: tucson,AZ
Default pj panel help

i just got a projection panel today its a Proxima VersaColor II Model A 722C it doesnt have a ac power suply does anyone know where to get one or know how i can hard wire a power suply to it (its the round kind)

back sticker says
input +10.0vdc/2.00a,-33.0vdc/300ma

what do i use?

it has 5 pin holes 4 up top one at botom.
  Reply With Quote
Old 23rd February 2006, 09:24 PM   #2
diyAudio Member
 
Luke_284's Avatar
 
Join Date: Feb 2006
Location: Bracknell
Lightbulb Power Input

Try and find a universal dc adaptor/transformer, they normaly go to 12v, You can probably get 1 at your local hardware store. Coz im in UK i dont know any shops tht would sell them but im using 1 now for my psX LCD
  Reply With Quote
Old 23rd February 2006, 09:24 PM   #3
diyAudio Member
 
Luke_284's Avatar
 
Join Date: Feb 2006
Location: Bracknell
Default Power Input

Just did a quick web search and found this

http://www.magneticsusa.com/act133.htm

http://www.magneticsusa.com/AC/dc.htm

Or try searching "universal 1-12v dc power adaptor" in your favourite search engine
  Reply With Quote
Old 23rd February 2006, 09:37 PM   #4
diyAudio Member
 
Join Date: Apr 2005
Location: tucson,AZ
thoes wont work wrong kind of connection it looks like this
Attached Images
File Type: jpg pj panel.jpg (8.2 KB, 74 views)
  Reply With Quote
Old 23rd February 2006, 10:19 PM   #5
diyAudio Member
 
Luke_284's Avatar
 
Join Date: Feb 2006
Location: Bracknell
Default Power Input

Havn't ever seen a connection like tht 4 power, unfortunately u may have to solder a power source onto the circuit board, if u can't find any fitting adaptors
  Reply With Quote
Old 24th February 2006, 05:55 AM   #6
diyAudio Member
 
Join Date: Apr 2005
Location: tucson,AZ
ok i contacted proxima the other day about the power supply and heres what they sent me

Unfortunately we have not carried the power supply for this panel for
some time.

The pinout for the power connector is shown below:
Pinouts
1 10V 2A
2 GND
3 33V 200mA

can anyone help me on what power supply i can use and how i can wire it up to work?
  Reply With Quote
Old 24th February 2006, 07:39 AM   #7
diyAudio Member
 
Luke_284's Avatar
 
Join Date: Feb 2006
Location: Bracknell
Default Power Input

i would say trying a seperate power adaptor for 1 (10V) and 3(33V, Connect all from the same adaptor) and then hook the gnd to your grounding connection

thts all i can think of

also the adaptor must have the exact or higher ampage or the adaptor will melt
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 03:35 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2