DIY dlp videoprojector

flanker20 · 10th September 2001, 01:26 PM

Hello,

I would like to no more about building my dlp projector.

I've read all i can on DLP.com site but i don't find informations about the different pieces needed to build the projector.

Also looking for prices about the different elements needed.

Thanks to everyone who can help me !!!

vdi_nenna · 10th September 2001, 01:43 PM

If you read through the DIY Projector project thread below, you'll find a link for DLP parts.

flanker20 · 10th September 2001, 02:17 PM

Thanks for the link (lasersurplus.com).

But they have no boards to control the DMD chip.

I don't know if it's possible to find them with tech. ref.

vdi_nenna · 10th September 2001, 02:52 PM

I don't know much about DLPs. I wish I did. I don't know what type of driver board they use. Looks like most of the parts are there. It's a start. Good Luck.

Vince

Brian Guralnick · 26th July 2002, 09:08 PM

If I can get the complete data sheets on the DLPs, I would be glad to design a driver board from scratch.

26th July 2002, 09:08 PM	#5
Brian Guralnick diyAudio Member Join Date: Mar 2002 Location: Montreal, Quebec, Canada	If I can get the complete data sheets on the DLPs, I would be glad to design a driver board from scratch. __________________ _______ Brian

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th September 2001, 01:26 PM	#1
flanker20 diyAudio Member Join Date: Sep 2001	Hello, I would like to no more about building my dlp projector. I've read all i can on DLP.com site but i don't find informations about the different pieces needed to build the projector. Also looking for prices about the different elements needed. Thanks to everyone who can help me !!!

10th September 2001, 01:43 PM	#2
vdi_nenna diyAudio Member Join Date: Oct 2000 Location: PA, USA	If you read through the DIY Projector project thread below, you'll find a link for DLP parts.

10th September 2001, 02:17 PM	#3
flanker20 diyAudio Member Join Date: Sep 2001	Thanks for the link (lasersurplus.com). But they have no boards to control the DMD chip. I don't know if it's possible to find them with tech. ref.

10th September 2001, 02:52 PM	#4
vdi_nenna diyAudio Member Join Date: Oct 2000 Location: PA, USA	I don't know much about DLPs. I wish I did. I don't know what type of driver board they use. Looks like most of the parts are there. It's a start. Good Luck. Vince

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)