LCD panels - Page 34

gregory27 · 25th February 2003, 12:49 AM

I have seen pci cards that can send vga signal to LCD directly
The capacity of these cards are low resolution(2megs pci), but coupled with a dvd card would it be a good alternative to 200$ controller?
Thanks for your help!!
sub-zero in MN

chbright · 25th February 2003, 05:01 PM

What do you think this controller is for a monitor or a laptop panel?

nec controller

Any info about its original purpose would help.

zardoz · 5th March 2003, 01:58 PM

Good site with some interesting info. As mentioned ...probably/for sure no good for a PJ but for other uses looks like a winner.

http://home1.gte.net/bs/sharp2.html

zardoz

NordicNINE · 5th March 2003, 06:06 PM

Quote:

Originally posted by rajkumar
FYI.

http://www.softwareandstuff.com/h_mon_unisys105lcd.html

Unisys 10.5" LCD Monitor w/ 4MB PCI Video Card
$119.95

Specifications
-10.5" Viewable screen
-Maximum resolution-800x600(1024x768 can be displayed in virtual monitor mode)
-Maximum Colors displayed-16 Million
-4MB PCI Video Card(Plug & play in Windows 98 SE and above), supports dual monitor mode
(PLEASE NOTE: THIS MONITOR WORKS ONLY WITH THE SUPPLIED VIDEO CARD
-Adjustable monitor neck

Has anyone used one of these yet?

I'm tempted to get one, but I'm wondering how easy they rip apart, etc...

zardoz · 5th March 2003, 10:22 PM

For the cost involved I'd say buy one,( if you are carefull) the worst is it won't work for what you want..and you have a tiny little monitor thats looking for something to do.....Ebay...

zardoz

NordicNINE · 6th March 2003, 12:08 AM

What monitors have people taken apart?

Office Depot has a 15" SVA LCD for $197 after $30 rebate and I can order a Samsung 150N for a little more.

I'll probably get the Samsung if I knew it could be taken apart succesfully.

water1 · 6th March 2003, 12:15 AM

From what I'v read hear the NEC1545v and the I-O DATA A15V.

It sound's like the I-O DATA is easyer or a little safer to take apart...

zardoz · 6th March 2003, 12:19 AM

I use lap top LCD's so don't keep up on current monitor stats.

zardoz

bigtinker · 21st March 2003, 04:52 PM

Hello all,

I just finished disassembling a NEC LCD1555VBK. I think the panel bears a HannStar logo and the boards attached to the LCD are conected via a tiny ribbon cable. I will post pictures if anyone is interested.

BigTinker

water1 · 21st March 2003, 07:21 PM

PIc's Pic's... YES we want to see the picture's.....

Hope all is going well....

25th February 2003, 12:49 AM	#331
gregory27 diyAudio Member Join Date: Jan 2003 Location: Anoka, MN	NEWBIE QUESTION??? I have seen pci cards that can send vga signal to LCD directly The capacity of these cards are low resolution(2megs pci), but coupled with a dvd card would it be a good alternative to 200$ controller? Thanks for your help!! sub-zero in MN

5th March 2003, 01:58 PM	#333
zardoz diyAudio Member Join Date: Oct 2002 Location: Nova Scotia	probably no good for a PJ but..... Good site with some interesting info. As mentioned ...probably/for sure no good for a PJ but for other uses looks like a winner. http://home1.gte.net/bs/sharp2.html zardoz __________________ Stand alone HTPC with a laptop LCD screen.

5th March 2003, 10:22 PM	#335
zardoz diyAudio Member Join Date: Oct 2002 Location: Nova Scotia	NordicNINE For the cost involved I'd say buy one,( if you are carefull) the worst is it won't work for what you want..and you have a tiny little monitor thats looking for something to do.....Ebay... zardoz __________________ Stand alone HTPC with a laptop LCD screen.

6th March 2003, 12:19 AM	#338
zardoz diyAudio Member Join Date: Oct 2002 Location: Nova Scotia	no monitors were harmed in the making of this..... I use lap top LCD's so don't keep up on current monitor stats. zardoz __________________ Stand alone HTPC with a laptop LCD screen.

21st March 2003, 04:52 PM	#339
bigtinker diyAudio Member Join Date: Mar 2003 Location: USA, DC area	NEC 1555V is not usable (for me) Hello all, I just finished disassembling a NEC LCD1555VBK. I think the panel bears a HannStar logo and the boards attached to the LCD are conected via a tiny ribbon cable. I will post pictures if anyone is interested. BigTinker


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th February 2003, 05:01 PM	#332
chbright diyAudio Member Join Date: Aug 2002 Location: blacksburg, va	What do you think this controller is for a monitor or a laptop panel? nec controller Any info about its original purpose would help.

6th March 2003, 12:08 AM	#336
NordicNINE diyAudio Member Join Date: Jul 2002 Location: Minnesota, USA	What monitors have people taken apart? Office Depot has a 15" SVA LCD for $197 after $30 rebate and I can order a Samsung 150N for a little more. I'll probably get the Samsung if I knew it could be taken apart succesfully.

6th March 2003, 12:15 AM	#337
water1 diyAudio Member Join Date: Feb 2003 Location: florida	From what I'v read hear the NEC1545v and the I-O DATA A15V. It sound's like the I-O DATA is easyer or a little safer to take apart...

21st March 2003, 07:21 PM	#340
water1 diyAudio Member Join Date: Feb 2003 Location: florida	PIc's Pic's... YES we want to see the picture's..... Hope all is going well....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
is there anything bad about MDF panels?	jarthel	Multi-Way	3	22nd June 2007 06:47 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read