I got my new lamp. It is for commercial projection use. people use it to replace the

[mrriso]

Originally posted by ywh
Hi ! everyone!
the JYD/JYS can not replace all projector bulb, so I found these:

Lamp kit model Spec mm price Projector model
UHP120/150W 65*70 105 Epson5350,Infocus755,SonyS900
UHP200W 52*56 187.5 SanyoSU50,Philips3146
UHP200W 65*70 247.5 SanyoXU35,Epson811,SonyPX10
UHP150W 50*55 187.5 SanyoSW20,EIKI SM3
UHP200W 80*80 285 SanyoXP40,
UHP200W Round 85 285 SanyoXP18,EIKI 984,Canon7353,SharpP10
UHP250W 65*70 247.5 Sharp450X,Infocus820,Epson7800
VIP250w 65*70 240 Sharp450X,Infocus820,Epson7800
UHP250W 56*56 232.5 ToshibaD1,benq8225,ViewSonic650D
UHP250W 80*80 292.5 SanyoXT10,XT15
VIP300W 56*56 270 HP 8010 BENQ 8255
VIP150/P22 65*70 150 LG XG22,EIKI NB2W,SanyoSU20N
VIP120/P16 120 LG JT21,3M 7720,Acer700X
VIP150/P16 180 LG JT21,3M 7720,Acer700X,benq2105
VIP150/P24 225 PLUS U2 series
VIP250W 80*80 292.5 SanyoXT10,XT15
VIP300W 80*80 300 FUJITSUC211
SHP180W 50*50 240 SharpBN200X,SHP51
SHP150W 65*70 240 MITSUBISHI51U,Toshiba680
SHP270W 65*70 330 MITSUBISHIXL25,ASK C300,Infocus790
SHP270W 247.5 Infocus340 350
SHP270W 247.5 Infocus530 500
NSH200W 65*70 240 NEC1050,HITACHI2020,SharpCN300S
NSH200W 50*55 225 PLUS U2 210 benq650
NSH250W 80*80 262.5 XP30,MITSUBISHI390
NSH275W 65*70 292.5 HITACHI885,5000
NSH275W 80*80 292.5 SanyoXP41,HITACHI6000
NSH300W 80*80 300 SanyoXP55
UMPRD150W 80*80 255 NEC830
UMPRD160W 60*65 345 NEC440
UMPRD160W 80*80 330 SanyoSP10
NSH180W 50*50 330 MITSUBISHIXL8,SonyEX1
SHL130W 50*50 165 LV2,chenxingseries
HSCR165W 50*50 150 HITACHI 225 1000 1095
HSCR195W 50*55 180 Toshiba220

NSH180W 50*50 330 MITSUBISHIXL8,SonyEX1





YWH, I have a Mitsubishi XL8U. The bulb is a 180w NSH. Does your post mean that these bulbs will not work with these projectors or they will work with these projectors?

[ywh]

Hi joe2000chevy!
I have sent e-mail to you.

Hi mrriso
I am selling original projector lamp kit, noy only a burner core.
The price your NSH is $330

[mrriso]

YWH, Is that the only option? Can I use a Jyd DC lamp in my reflector?

[ywh]

Hi ! mrriso

that Is not the only option, that Is 100% successful.
I Can use a Jyd DC lamp in my reflector but a some risk.

there is a other way:
I can dig out a burner from a original projector lamp kit, and sell this burner to you. 100% successful and cheaper.
the reflector of original projector lamp kit is unwonted, so sell burner only.

[mrriso]

ywh, I have the original reflector and just want to relace the lamp. How much would it be for you to sell me the lamp out of your reflector?

[mrriso]

Never mind. I just now saw the email you sent me. $100.00. Does that include shipping?

[ywh]

yes, $100.00. include shipping;-)

[joe2000chevy]

YWH, I did not get the e-mail can you send again?

if it went to my junk folder i may have deleted it.

thanks, joe

[Dumbfounded]

Hello all.
New here, have read and learned quite a bit .
Very nice indeed.
Well between stepping up in quality of projectors and going through a couple I have taken yet another plunge on purchasing yet another projector.
My main decision maker for this new Olympus VP-1 project was this very forum and the availability of a lamp bulb for it. The bulb is 120W UHP
Here's a link: http://www.projectorcentral.com/Olympus-VP-1.htm

And the last production is 2005 so from what I've read it should be an AC current bulb. Lamp number I believe is: 205201


I also have made a purchase on an EIKI Projector LC4200 .
http://www.projectorcentral.com/EIKI-LC-4200.htm
The lamp number: 610 257 6269 , not sure on that one as the seller states that the projector lights and shuts off , well I'm not too familiar with the symptoms of powersupply / ballast / lamp problems. 195W Metal Halide
Here's a post that was in January 06 > Post #385
Not sure if there are any updates so are there any ideas on that one?

I primarily am looking for the bulb for the Olympus VP-1 and secondarily for the EIKI LC4200

I have read about the problems on finding a medium for mounting these lamps and have an idea if I may.
Has anyone tried hydraulic cement? It's a cement used for quick repair of water based problems in cement foundations and is fine in texture.
It sets very fast and is water based for easy cleanup.
I would also think it would handle the heat well.
====================
ywh <<<<<<Question for.
Needed: Bulb for Olympus VP-1 120w UHP ( if I go with a 150W or 200W bulb will I get more lamp hours? )

EIKI LC4200 195W Metal Halide

What bulbs will I need for these projects and how much total Shipped?

Looking forward to your answer~

[ywh]

Hi Dumbfounded !

the Bulb for Olympus VP-1 120w UHP is 120W JYD/AC, if you go with a 150W or 200W bulb will you get more lamp hours;-)

the Bulb for EIKI LC4200 195W Metal Halide is 200W JYS, but I dont know AC or DC, you have to check it, test the V of lamp, or give me a pic of the bulb. close pic

1*120W JYD/AC + 1* 200W JYS + Shipping =$105