DIY LCD Projector FAQ - Page 3

Prufrock · 16th June 2004, 06:56 PM

Come on!! Are you kidding? I have the new one for the projector, but I saved the old one. I WILL test this! Especially since it's ruined already... couldn't get worse (I suppose it could melt...)
Thanks

auz_mo · 17th June 2004, 12:40 PM

I hope it works for you as well as it worked for me, as for melting... just think of the heat these things go through sitting on top of an overhead, a heck of a lot more than the boiling point of water at 220 degrees

MadSkillzMan · 5th April 2005, 06:37 AM

Quote:

Originally Posted by Negative Design

Post #9
can you make a projector from an ARTOGRAPH, they're quite powerfull 60 to 500 watts. im thinking about getting one and im trying to get peoples ideas.

thank you very much.

-jimmy-

I would also like to know the asnwer to this. Ive searched around about opaque projectors. Its my understanding that lens barrels from these projectors are superior to OHP's in the sense they can use a dimer light source? Is this true? I have searched and found limited info on it.

Thanks in advance.

ladangelo202 · 31st March 2006, 01:03 AM

http://www.superbrightleds.com/leds.htm
i read through all the perm posts and discovered alot about optics and light disipation in the process, the idea was for super white led diy lcd projectors, i have found high power leds 4 years later, if any one would lke to do this i will try to fill in with the most information possible and if not we can have a pretty nice discusion.

i know this is not about the leds but if we can bring them back they may be able to help at least one person. thanks for reading.

ladangelo202 · 31st March 2006, 03:40 AM

http://www.luxeonstar.com/item.php?i...=LXK2-PW14-U00

cool 1 · 1st June 2006, 03:38 PM

I"ve just purchased a portable RCA DRC618n and i would like to turn it into a projector can someone please give me some ideas as i would like to project this out to a 62"screen.

matz · 21st September 2006, 11:09 PM

thanks for this faq

petercfoy · 24th January 2007, 11:43 AM

Hi,

Anyone had any more information on using an ARTOGRAPH or EPISCOPE to create an image. It will still need to be back lit to allow light through the panel, but the light source could be considerably less, and then re-lit as it goes out the artograph/episcope lens?

?? maybe ??

ciderman · 29th April 2007, 07:40 AM

do you not think now that other people read the,s things like major companies and are gonna start making it hard for people like you or me to strip monitors to bare bones and use them for lcd projection excuse me if im wrong but i am new to this post

ciderman · 8th May 2007, 12:43 AM

Do you mean the ones the sell in argos and do they work i found a web page with plans that you dont have to strip the lcd but does it really work i would like a reply if any body knows about this or is it bulls****

31st March 2006, 01:03 AM	#24
ladangelo202 diyAudio Member Join Date: Mar 2006 Location: East Brunswick, New Jersey	leds http://www.superbrightleds.com/leds.htm i read through all the perm posts and discovered alot about optics and light disipation in the process, the idea was for super white led diy lcd projectors, i have found high power leds 4 years later, if any one would lke to do this i will try to fill in with the most information possible and if not we can have a pretty nice discusion. i know this is not about the leds but if we can bring them back they may be able to help at least one person. thanks for reading.

31st March 2006, 03:40 AM	#25
ladangelo202 diyAudio Member Join Date: Mar 2006 Location: East Brunswick, New Jersey	another great led http://www.luxeonstar.com/item.php?i...=LXK2-PW14-U00

1st June 2006, 03:38 PM	#26
cool 1 diyAudio Member Join Date: May 2006	LCD I"ve just purchased a portable RCA DRC618n and i would like to turn it into a projector can someone please give me some ideas as i would like to project this out to a 62"screen.

24th January 2007, 11:43 AM	#28
petercfoy diyAudio Member Join Date: Jan 2007 Location: London	ARTOGRAPH Hi, Anyone had any more information on using an ARTOGRAPH or EPISCOPE to create an image. It will still need to be back lit to allow light through the panel, but the light source could be considerably less, and then re-lit as it goes out the artograph/episcope lens? ?? maybe ??

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th June 2004, 06:56 PM	#21
Prufrock diyAudio Member Join Date: Apr 2004 Location: Michigan	Come on!! Are you kidding? I have the new one for the projector, but I saved the old one. I WILL test this! Especially since it's ruined already... couldn't get worse (I suppose it could melt...) Thanks

17th June 2004, 12:40 PM	#22
auz_mo diyAudio Member Join Date: Jun 2004 Location: Sudbury, Ontario	I hope it works for you as well as it worked for me, as for melting... just think of the heat these things go through sitting on top of an overhead, a heck of a lot more than the boiling point of water at 220 degrees

21st September 2006, 11:09 PM	#27
matz diyAudio Member Join Date: Sep 2006	thanks for this faq

29th April 2007, 07:40 AM	#29
ciderman diyAudio Member Join Date: Apr 2007	do you not think now that other people read the,s things like major companies and are gonna start making it hard for people like you or me to strip monitors to bare bones and use them for lcd projection excuse me if im wrong but i am new to this post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Projector Parts - Overhead Projector, lenses, mirrors, + more	Moose	Swap Meet	4	27th November 2005 08:37 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read