OOPS... the projector is an olympus vp1 - now out of production, but it's a GREAT projector (very small) - it's really a shame that a simple lamp can make it obsolete!
If anyone figures out how to do a retrofit for the lamp or at least how to make it turn the image on, please post it here.
thanks!
If anyone figures out how to do a retrofit for the lamp or at least how to make it turn the image on, please post it here.
thanks!
HOW DO I TRICK THE BALAST ON A POLAROID POLAVIEW 350I
Hi, everyone
i have a Polaroid polaview 350i projector.
i would like to trick the ballast into thinking there is a working bulb.
a lot of people are saying that there is three wires coming out of ballast, +5 volts, signal & ground.
i do see a small plug coming from the ballast to the main board,
one wire is brown and the other two are Grey.
if these are the wires that people are talking about, what do i set my digital meter on, i have one of those cheap red one`s from harbor freight?
what two wires do i jump?
do i leave the connection plugged into the main board?
do i cut the two wires that i`m suppose to jump?
thank you
Hi, everyone
i have a Polaroid polaview 350i projector.
i would like to trick the ballast into thinking there is a working bulb.
a lot of people are saying that there is three wires coming out of ballast, +5 volts, signal & ground.
i do see a small plug coming from the ballast to the main board,
one wire is brown and the other two are Grey.
if these are the wires that people are talking about, what do i set my digital meter on, i have one of those cheap red one`s from harbor freight?
what two wires do i jump?
do i leave the connection plugged into the main board?
do i cut the two wires that i`m suppose to jump?
thank you
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.